Top positive review
It's good with a little but.
on 11 August 2012
I'm in the middle of a rebuild, so needed to use a 5¼" bay for a card reader & multiple USB 2.0 & 3 sockets (Akasa AK-ICR-17), this was the ideal solution, it's a good solid plastic and it has 4 lugs to secure whatever you want inside be it a drive or card reader. The adapter comes with 4 screws which will be used to secure the adapter to the PC case if required.
However you should be aware these lugs which secure your device into the adapter are where you will need to use a bit of care as to secure a card reader or drive in it, you will need longer screws than the ones supplied with (in my case the Akasa AK-ICR-17) instead you will need to use the longer type which are usually used to secure either a 3½" Hard Drive or a PC blanking plate, as the ones supplied are too short to go through the lugs & into the reader or drive and secure it.
The colour on mine is fine and will match the PC case perfectly, it's jet black as it should be, not pale or faded as I've heard from other places about the same thing.
If you need one of these this is the cheapest place I can find it, in fact it's over £9 on ebay!