Digital Anemometer LCD Wind Speed Gauge Handheld Air Flow Velocity Measurement Thermometer Device for RC Drones Helicopter Windsurfing Kite Flying Sailing Surfing Fishing (Battery Included)
- Choose from over 13,000 locations across the UK
- Prime members get unlimited deliveries at no additional cost
- Find your preferred location and add it to your address book
- Dispatch to this address when you check out
- LCD Digital Anemometer Wind Speed Meter: Use to Measure Wind Speed and Temperature
- Wind Chill Indication; Data Hold Function; Auto/ Manual Power Off; High Precision Pressure Sensor
- Wind Speed Range: 0-30m/s; Wind Speed Unit: m/s, Km/h, ft/min, Knots, mph
- Wind Temperature Range: -10 - 45℃(14-113℉); Storage Temperature: -40~60℃( -40~140℉)
- Air Velocity: Range: 0 - 30m/s, 0 - 90km/h, 0 - 5860ft/min, 0 - 65mph, 0 - 55Knots
Frequently bought together
Customers who viewed this item also viewed
Customers also shopped for
Have a question?
Find answers in product info, Q&As, reviews
This product is subject to specific safety warnings
This Digital Anemometer is ideal for outdoor activities such as Sailing, Surfing, Hand-gliding, Shooting and Walking. It is also ideal for educational instruments.
There are three modes to choose from, Maximum, Average and Current wind speed
Large easy-to-read LCD display with backlight.
Wind speed in Beaufort wind scale bar graph.
High precision pressure sensor
Quick response, external thermistor
Auto/manual power off
Temperature display in ℃/℉
Wind speed range: 0-30m/s
Wind temperature range: -10 -45 centigrade (14-113℉)
Current/max/average wind speed reading
Wind speed unit: m/s, Km/h, ft/min, Knots, mph
Powered by a 3V CR2032 battery
Thermometer: NTC Thermometer
Operating Humidity: less than or equal to 90%RH
Storage Temperature: -40~60 centigrade, -40~140℉
Current Consumption: About 3mA
Range: 0 -30m/s, 0 -90km/h, 0 -5860ft/min, 0 -65mph, 0 -55Knots
Resolution: 0.1m/s, 0.3km/h, 19ft/min, 0.2mph, 0.2Knots
Threshold: 0.1m/s, 0.3km/h, 39ft/min, 0.2mph, 0.1Knots
Accuracy: ± 5%
Range: -10 -45 centigrade, 14 -113℉
Resolution: 0.2 centigrade, 0.36℉
Accuracy: ± 2 centigrade, ± 3.6℉
1 * TL017 Digital Anemometer
1 * 3V CR2032 Battery
1 * Lanyard
1 * Protective Case
1 * User Manual
Warranty: This Proster Digital Anemometer Provides 18 Months Warranty.
What do customers buy after viewing this item?
Showing 1-8 of 33 reviews
There was a problem filtering reviews right now. Please try again later.
After that I was amazed at how well this thing works.
All the speeds in all the measurements you could hope for including knots (how cool is that ?)
Brilliant little piece of kit that will no doubt get extensive use all over the shop!
I use this for measuring Computer extractor fans, and the output temperature of the air leaving the computer case.
My only niggle is that I changed default for Average measurement to Max. This worked as expected until I wanted to reset it to take another reading. There doesn’t appear a way of doing this without going into the settings again and reselecting. Even turning unit off and on again doesn’t clear the reading.
Despite this, am happy with my purchase
I can use an app to get estimates, but this really helps to make sure I know what the drone is likely to do on lifting off.
Nice and small too, so not much weight or bulk to worry about in a small bag.
Cheap and cheerful but worth it!
Battery replacement? Cunning. Take the rubber cover off (not initially evident, but that's the yellow surround!)