VonHaus Premium Cantilever TV Wall Bracket for 32 - 65 inch LCD, LED & Plasma TV. Super-strength Load Capacity up to 75KG, 15 degree Tilt mechanism up/down, Max VESA 700x450
- Enter your model number above to make sure this fits.
- Weight rated to 80KG - This bracket is the strongest brackets available on Amazon
- Constructed from reinforced heavy gauge cold rolled steel - this bracket is very strong!
- Back Plate features a large cut out to mount over plug sockets and Ariel plates
- This Bracket is Universal and will Fit 99% of all makes and models of TV within the stated size range (32" to 65") Max VESA dimensions 700 x 450mm (VESA Dimension is the most important specification when considering the best TV Bracket for your television. Please ensure your TV is compatible with this brackets MAX VESA by checking your TV's manual or by measuring the distance between the 4 holes on the rear of the television)
- Quick and easy to install - bracket comes complete with full instructions and FREE FITTING HARDWARE
Customers Who Bought This Item Also Bought
Minimum - 100x100mm
Maximum - 600x400mm
Carbon Steel, Powder Coated
Solid Wall or Single Stud
Spirit Level Included
Compatible with 99% of makes including: Sony, Samsung, LG, Panasonic, Phillips, Toshiba, Sharp, Mitsubishi, Sanyo, JVC, Logik, and much more!
All Fitting Hardware included:
VESA Dimension is the most important specification when considering the best TV Bracket for your television. Please ensure your TV is compatible with this brackets MAX VESA (600x400) by checking your TV's manual or by measuring the distance between the 4 holes on the rear of the television.
05/005 TV Bracket
What do customers buy after viewing this item?
Top Customer Reviews
First things first. Ignore the built in 'level'. With the bracket up and square on the wall, the bubble on my unit is right up at one end of the level.
How I fitted:
1) Attach the arms to the TV using whatever hardware is required. (There are screws/washers/spacers for lots of different TV fitments included)
2) Clip the main bracket to the arms and tighten the required screws and knobs.
3) Get someone to help offer the TV up to the wall and mark around the wall plate to get a rough placement.
4) Dismantle again, then take the big front plate off from the wall plate and canti arms using the 5 screws. It's much easier to manoeuvre the backplate without the front attached.
5) Pull out the cantilever arms from the backplate so they are angled out at about 20 degrees.
6) Place up against the wall and put a spirit level on each section of the arms, and adjust until level. The most important thing to get level is the action of the arms as they move in and out. If this is level, then the screen will stay level when you move it in/out and swivel. When you're level, trace the wall inside each of the mounting holes with a pencil.
7) Drill holes for the mounting bolts. I placed one at each corner and 2 towards the centre. I used a 9mm masonry bit, not 10mm as written on the plugs. I also used a larger masonry bit to make a shallow countersink for the flanged end of the wall plugs so they sat flush with the wall.Read more ›
It took me approximately an hour from start to finish to mount and fit this item, while it does have a small built in spirit level in the bracket itself I would highly reccomend using a seperate one as the built in one I had was at a slight angle, giving you a false reading. I used the 6 bolts and large raw plugs the unit came with to mount the unit to the wall (a 10mm drill masonary bit is required) and after taking my time to ensure everything was lined up I got to work. I manged to conduct the vast majority by myself although I did get someone else to tighten the bolts the last 3 turns while I held the heavy bracket in place to ensure it was nice and level. You could prossibly do this single handed if you either have the strength or aren't quite as fussy as myself in being assured that alignemnt on the spirit level is as close to perfect as humanly possible.
When I put the TV on the bracket I admit to a small heart in mouth feeling although this was very short lived, it's more than up to the job and was nothing more than myself getting over my own fear or it not sitting on a cabinet and with nothing but air beneath it. I pulled the mechanism all the way out from the wall with my heavy TV attached and there is no sign of any movement in the bolts to the wall, it's certainly assuringly strong and secure. I have seen posts about people using different bolts or extra screws as a "just in case" and if this makes you happy then so be it but the 6 that come with the unit hold my exceedingly heavy old 37" plasma to the wall with ease.
Far, far heavier than the 37" Panasonic LCD panel I bought it for.
The mounting screw bolts it came with are beefy and long (2.5"?) but after feeling the weight of this monster I decided they were not enough and I went and bought 4 12mm diameter rawl bolts to make sure that this wasn't going to drop my panel onto the coffee table.
The build quality I would say is generally high. Solid construction, heavy metalwork. The swivel bearing are very stiff - by design possibly so that a heavy panel stays where you position it perhaps - but I really have to wrestle the thing out of its home position when I want to move it - it may ease with use?
Hanging this on the wall is a two man operation because of the weight and because of the offset. The back plate which is fixed to the wall is smaller than the plate which the panel hangs on and it is set to one side - this can make this a bit difficult to hang as I was placing my panel inside a surround we'd had made for the chimney breast and it would have been more useful if the back plate had been the same dimensions as the front plate so one could easily see where the panel would eventually sit.
A word of warning - do not use the bubble level which is attached to this bracket. With the bubble smack in the middle the level was off by a mile and I've found this to be the case with a number of Vesa mounts I've come across. Use a standard spirit level for accuracy.Read more ›
Most Recent Customer Reviews
Choose this because of the weight it could carry. Good solid item although it tilts quite easily it is quite tricky to move from side to side. Generally happy though.Published 15 days ago by Bexter
Had for months woke up to this!!!!!! Tv broke solid oak floor scrapped and dented fire beside it glass scrapped tv unit for sky box smashed phone screen home black. Read morePublished 1 month ago by Adrianne L.
Great, solid, reasonably priced tv wall mounts. I have two of them, and they're brilliant. So impressed. Go VonHaus!Published 2 months ago by Lawrence Cook
Tv wall bracket worked well for my 50in tv give my recommendation.Published 2 months ago by binarani sharma paul