Other Sellers on Amazon
+ £4.04 UK delivery
+ FREE UK delivery
+ FREE UK delivery
StarTech.com 2 Port SATA to eSATA Slot Plate Bracket
|Price:||£4.47 & FREE Delivery in the UK on orders over £20. Details|
- Choose from over 13,000 locations across the UK
- Prime members get unlimited deliveries at no additional cost
- Find your preferred location and add it to your address book
- Dispatch to this address when you check out
- Enter your model number above to make sure this fits.
- Connects to an internal eSATA port and adds two eSATA ports allowing connectivity to external SATA devices
- Easy to use and install
- Backed by StarTech.com's lifetime warranty
- Compliant with Serial ATA III Specifications
This item is available because of the Add-on programme
Frequently Bought Together
Customers Who Bought This Item Also Bought
StarTech.com''s eSATA SATA adapter plate adds external data support to any existing Serial ATA controller, adding two eSATA ports for connection to external SATA devices.
The adapter plate can be mounted to the rear panel of the computer case, providing straightforward eSATA to SATA connections and allowing users to connect their eSATA device (hard drive enclosure, etc.) to the provided eSATA port which is an extension of the motherboard SATA data connector.
Designed to take advantage of the increased data integrity provided by external hard drives or RAID devices that support eSATA connections, the eSATA SATA adapter supports data transfer rates of up to 300 MBps and is backed by StarTech.com''s Lifetime Warranty.
What do customers buy after viewing this item?
Top Customer Reviews
The internal SATA links slotted straight in, but when connecting my eSATA cable I found the metal clips inside the female socket were too close together and wouldn't let the male part in. I had to unscrew the socket from the plate and prise the clips apart a little. However, once that was done the eSATA cable slotted in and works fine.
they sit loose in the socket.. wobbling... and I'm getting data i/o errors.
Couldn't be bothered sending it back... binned it
To connect the unit to the motherboard, the cables had to navigate around/over my existing PCI and PCI Express cards (which cannot be moved). Unfortunately, due to the navigational path of the cables - I could only connect one of the two cables to the motherboard - as one was slightly too short to reach the connector on the motherboard (i.e. both cables are the same length - but one cable had to travel slightly longer - which was the difference between reaching and not reaching the motherboard connection).
However, at this stage, I only have one external drive, so this is not currently a problem. But it may be a problem in the future, should I get another external drive.
If the cables were 3" to 6" longer, then I would not have experience the above problem.
Other than the shortness of the cables - the unit works fine.
Most Recent Customer Reviews
Tested this adapter with the following external devices:
- Drobo S
- Sharkoon 8-bay Disk Station
Worked perfectly due to port multiplier as advertised.
The cables on the back of this could be a little longer. They didn't reach from back to front of my case. Had to purchase an additional extender. Otherwise, a decent unit.Published 19 months ago by Peter Mee
Easy to fit. I have an external hard drive that has USB2 and eSATA. eSATA is much faster than USB2. This plate allows me to plug in the external drive/s.Published on 17 July 2013 by Steve Steele
Saves me money by allowing me to connect my external raid to the internal sata ports of my MB. Great easy solution and would recommend to anyone with spare internal ports.Published on 1 Jun. 2013 by T Crawford
The cables are just the right length for my motherboard / case
It works just fine with my Windows 7 machine
This device gets the job done as an interface between USB 2.0 and e-sata. I have not had problems with it, so I am happy.Published on 19 Mar. 2013 by Kaunas8