REAL PLA (Polylactic acid or polylactide) is a hard thermoplastic, produced out of renewable sources like corn or starch. PLA has a relatively low melting temperature of 175C and is one of the easiest 3D printing material. PLA can be used for almost any 3D-object.PLA is an easy to use filament type and a very popular choice in the 3D printing community. It's possible to print very accurate and precise objects without a heated bed. Thanks to the great fluidity in molten state PLA is a great alternative for ABS. PLA can also get to higher print speeds. REAL PLA always has a stunning glaze, the printing temperature varies from 180C to 230C.The recommended setting is 210C. For the best results you can print at a speed between 40 and 80mm/s. All REAL PLA Filament has a magnificent deep colouring. REAL filament applies to all ROHS and REACH certificates. These certificates can be found and downloaded on the manufacturers web page. There is also a MSDS available.