- Also check our best rated Remote Control Car reviews
LHI FPV Mini Robocat Carbon 270 4-axis Quadcopter Race Copter Frame Kit ARF++ CC3D Flight Controller + MT2204 2300KV Motor + Simonk 12A ESC + 6030 CF Propeller Prop
|Price:||£96.00 & FREE Delivery in the UK. Delivery Details|
Fulfilment by Amazon (FBA) is a service Amazon offers sellers that lets them store their products in Amazon's warehouses, and Amazon directly does the picking, packing, shipping and customer service on these items. Something Amazon hopes you'll especially enjoy: FBA items are eligible for and for Amazon Prime just as if they were Amazon items.
If you're a seller, you can increase your sales significantly by using Fulfilment by Amazon. We invite you to learn more about this programme .
- Choose from over 13,000 locations across the UK
- Prime members get unlimited deliveries at no additional cost
- Find your preferred location and add it to your address book
- Dispatch to this address when you check out
- Robocat mini frame Carbon Fiber Quadcopter Frame with MT2204 Motors & 12A ESC & 6030 Prop
- Main material:Pure carbon fiber
- With rubber damper to decrease vibration during flight
- Aluminum alloy spacer, light weight, reliable
- Note: All the rubber damper and screws, spacer are in random color.
Frequently bought together
Customers who bought this item also bought
Based on Simon K firmware, further optimized to the perfect drive performance.
Low-voltage protection, over-heat protection and self-check functions.
Separate power supply for MCU and BEC, enhancing the ESC's ability of eliminating magnetic interference.
Parameters of the ESC can be set via program card or transmitter.
Throttle range can be set to be compatible with different receivers.
Equipped with built-in linear BEC or switch BEC. Max speed: 210,000 rpm for 2-pole, 70,000 rpm for 6-pole, 35,000 rpm for 12-pole.
Continuous Current: 12A
Burst current (10S): 15A
Li-xx Battery (cell): 2-3
Dimension (L*W*H): 25mm x 20mm x 7mm
Weight wires Included: 9
BEC Mode: Linear
BEC Output: 1A/5V
Emax MT2204 2300KV Motor
1. Low CG design, ligth weight design, longer flight duration
2. Factory has made dynamic balance test for each motor
3. Integreated processing between prop mount holder and motor cap
4. Adopts Japan NMB bearing, with low noise and longer lifetime
5. Adopts Japan 0.2mm spindle, with high efficiency and low heat
Lipo battery: 2-3S
Max. Thrust: 440g
Prop suggest: 5-6 inch
Suitable for: 250mm wheelbase mini
quadcopter, light weight fixed-wing copter, indoor 3D airplane
1 x 270mm Carbon Fiber 4 Axis Mini Quadcopter
1 x CC3D Flight Controller
4 x MT2204 2300KV Multicopter Motor
4 x Simonk 12A ESC
4 x 6*3 6030 Carbon Fiber Propeller(2pcs CW + 2 PCS CCW)
100% Brand New
What do customers buy after viewing this item?
Top Customer Reviews
Good supplier and one mean machine for those that know what they're doing, or have a little time and patience to master this stuff.
(We used DX8/AR8000 transmitter/receiver combo. Do not use the helicopter settings for a quadcopter - use standard plane settings and follow the intructions in the CC3D groundstation software. CC3D is the name of the autopilot that the kit ships with. Add an Immersion 5.8 GHz 25mW video transmitter, a RunCam camera and some FatSharkFPV goggles. Fly without the goggles before you try to fly with them. You need some batteries too - we're using Tattu 1800mAh 3s LiPoly. Everything else comes in the kit.
Make sure you get insured (BMFA membership covers you and it's cheap) and make sure you fly somewhere desgnated for flying these things, or very safe.
The drone is nice, but the power board is super basic.
It requires time for all the connections to be undertaken, with ability in soldering and basic electronic connections, etc, being required.
All operated perfectly when completed.
You will still need to obtain some extra fittings, a few extra M3 X 5mm hex screws and some 6mm standoff spacers for mounting the PDB are particularly useful as none are included for this item.
Overall, an enjoyable product if you enjoy the construction phase and great, once finished, for flying.
I would by it again!
Most Recent Customer Reviews
This is a great kit, my first drone build, all easy enough to do without instructions, frame took 25 mins to build, electronics about 2 hours, then I had to learn how to set up... Read morePublished 9 months ago by MrDroneMX5