- Also check our best rated Camera reviews
JJC LH-60 Lens Hood - replacement for Canon ET-60
|Price:||£9.99 FREE UK delivery.|
- Enter your model number to make sure this fits.
- Suitable for: Canon EF 75-300mm f/4-5.6 II, EF 75-300mm f/4-5.6 II USM, EF 75-300mm f/4-5.6 III, EF 75-300mm f/4-5.6 III USM, EF 90-300mm f/4.5-5.6, EF 90-300mm f/4.5-5.6 USM, EF-S 55-250mm f/4-5.6 IS, EF-S 55-250mm f/4-5.6 IS II
- Replacement for Canon ET-60
- High quality compatible lens hood
- Made from ABS impact resistant plastic
- Bayonet mount to Canon lens
Customers also shopped for
A lens hood is a must for every D-SLR photo enthusiast. A lens hood is primarily designed to avoid unwanted stray light from entering the lens by extending and shading the end of the lens. The bayonet connection makes attaching the lens hood to your lens very simple. In addition, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact.
This lens hood is designed to replace the manufacturer branded version. A dedicated lens hood such as this, is specifically designed to match a lens or a number of lenses. Please take care when purchasing a lens hood for your lens, as some manufacturers have produced multiple versions of lenses with subtle changes to the lens model numbers and these lenses sometimes use different lens hoods. Just because the lens hood is designed for one lens does not mean it will fit a different version. If in doubt please check the manufacturers website to ensure you are purchasing the correct lens hood.
Top customer reviews
Supplied in a JJC printed retail box I had it fitted to the lens within seconds (literally) without issue. Ordered from Powerplanet (as they had it at the best price when ordering and) it arrived well packaged and well within the delivery window set by Amazon.
Has to be five stars in all respects.
UPDATE: 22nd November 2013
No issues at all with item which is still in use :-)
UPDATE: 15th January 2017
I sold (the lens a month or so ago together with) this lens hood which was still in the same condition as when I received it new - the new owner was pleased with it.
Fits perfectly, nice and tight if you fully rotate it and is reversible just like the real thing.
Couldn't be happier!
I had previously purchased a rubber type foldable lenshood, which screwed into the filter thread, but found this unsutable, so was about to buy a very expensive Canon lenshood. As far as I can tell this is exactly the same as the Canon hood it replaces, but is below half the price. It is basically a piece of plastic, as is the Canon one, which clips over the lens. I can clip it in a reversed position, for storage so it occupies very little space as it is stored with the lens.
It seems an excellent buy.