433MHz 12V 4CH Wireless Remote Control Switch Relay Switch with 2 Transceivers and 1 Receiver for Windows, Garage Doors, Toys etc.
We don't know when or if this item will be back in stock.
| Brand | INSMA |
| Special feature | Universal, Wireless |
| Colour | 2 Transceivers with 1 Receiver |
| Max number of supported devices | 1 |
| Compatible devices | Air Conditioner |
| Connectivity technology | Wireless |
| Number of buttons | 2 |
| Controller type | Button Control |
| Maximum range | 200 Metres, 30 Metres |
| Item weight | 5 g |
About this item
- Change of operation mode: wireless remote control, On/Off control unit with 4 channel CH 433MHz radio switch with 2 transmitters.
- Good design: wireless remote control, extremely easy to install and use. Stable and reliable performance with high reception sensitivity (> - 105dBm). Using wireless coding technique, non-directional switch, do not disturb each other.
- Good signal, high sensitivity: wireless remote control, a strong signal can overcome walls, floors and doors and be controlled from anywhere within a certain distance.
- Intelligent Learning Mechanism: Wireless remote control, the learning code provides high security due to the low repetition frequency and relearning mode, which allows you to erase the old code and re-learn a new code when losing a remote control. It can support up to 16 different remote encodings.
- Wide range of applications: wireless remote control, wide range of applications, from simple main remote control to autonomous control such as windows, entrances, garage doors, alarm systems, lifters and so on.
Customers also viewed these products
Product Description
Wireless RF Switch is a learning code wireless remote, suitable for door, window, switch and other equipment. You can switch its working way by jumper cap
Non Lock: jumper doesn't connect any two pins.
Relay: press one button is ON, loosen your finger on the same button is OFF.
Self-locking: jumper connects the pin2 and pin3.
Relay: press one button for one time is ON, press the same button again is OFF.
Interlock: jumper connects the pin1 and pin2.
Relay: press one button is ON, press another button is OFF.
Pairing
- Learn: Press learning button, the indicator flashes, loosen finger, press any button of the remote transmitter, indicator flashes three times, meaning learning succeeds.
- Remove: press learning button for about 8 seconds , the indicator lights up and off, meaning remove succeeds.
It can learn more than 12 PCS 2262 or 1527 chip with the different code wireless remote control.
Eg1. Wiring Diagram for Light
Parameter of Receiver:
Size: 7.2 x 5.2 x 2.6cm
Working voltage: DC12V
Quiescent condition: Less than 6mA
Working temperature: -40 Degree +80 Degree
Receiver sensitivity: more than -105dBm
Working frequency: 433mhz
Output voltage: DC and AC is optional
Output current: Less than 3A
Max load current: 20A
Eg2. Wiring Diagram for Motor
Parameter of Transmitter:
Size: 5.8 x 3.9 x 1.4cm
Remote Distance: 98FT/30M
Operating Voltage: DC 12V
Frequency: 433mhz
Operating Current: 13 mAh
Code Type: Fixed code / Learning code
Package Includes
2 x 4-Channel Transmitters
1 x Receiver
1 x Manual
Product details
- Is discontinued by manufacturer : No
- Product Dimensions : 0.1 x 0.1 x 0.1 cm; 4.54 g
- Date First Available : 23 Nov. 2017
- Manufacturer : INSMA Co.,Ltd
- ASIN : B01ELJ1D1A
- Guaranteed software updates until : unknown
- Customer reviews:
Customer reviews
Customer Reviews, including Product Star Ratings, help customers to learn more about the product and decide whether it is the right product for them.
To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Instead, our system considers things like how recent a review is and if the reviewer bought the item on Amazon. It also analyses reviews to verify trustworthiness.
Learn more how customers reviews work on AmazonCustomers say
Customers find the remote control easy to set up and use, with good value for money and positive quality ratings. They appreciate the control options, with one customer mentioning it can control both switch types and another noting it can connect four different alarms. The functionality receives mixed feedback - while it works well within 90ft, some customers report that the relays turn on randomly.
AI Generated from the text of customer reviews
Select to learn more
Customers find the remote control to be of good quality, with one customer specifically mentioning that it works very well.
"Great product, could I suggest that the remote controls have better protection against pocket pressing?..." Read more
"This product appears good quality, works perfectly and has nice remotes. Fitted it to control my roller garage doors...." Read more
"...I did two separate doors, you can do up to four. Great piece of kit" Read more
"This remote control switch looks well made and worked perfectly out of the box. It is really good value...." Read more
Customers find the remote control to be good value for money.
"...Good value for money, with good range." Read more
"So, I ordered 2 of these as I thought they were great at a very good price. However, I am now returning them...." Read more
"...It is really good value. The only pity is that they are single pole relays, so I had to supplement the circuit to achieve what I needed." Read more
"Great value / Very good produce..." Read more
Customers find the remote control easy to set up and use.
"I like these coz they are easy to set up...." Read more
"A great versatile unit that is easy to use and works perfectly at 7.2v. Good value for money, with good range." Read more
"A little error in the documentation with the NC/NO. Very easy to setup and use. don't hesitate to buy it..." Read more
"...The wiring diagram for a DC motor is a little confusing but it's basically to show how to energise and then reverse a motor, eg for a garage door...." Read more
Customers appreciate the control options of the remote, with one mentioning it can control both switch types, while another notes it can control a two-speed fan, and a third describes how it can connect four different alarms for maximum effect.
"The various programming options and its small physical size, make it an ideal pick for the projects where intermittent, non-locking or locking..." Read more
"...Your device allows me to control both switch types from one relay.Also it can control my two speed fan." Read more
"...Connect four different alarms for maximum effect." Read more
Customers have mixed experiences with the remote control's functionality: while some report it works well within 90 feet and find it very useful, others find it useless and mention that the relays turn on randomly.
"I got this to work with my car ECU, my 2002 Volvo d5 ,I can now switch from STD to tuned performance , there is a lot of demos and info on youtube..." Read more
"This remote control switch looks well made and worked perfectly out of the box. It is really good value...." Read more
"Useless piece of plastic!" Read more
"This product appears good quality, works perfectly and has nice remotes. Fitted it to control my roller garage doors...." Read more
Top reviews from United Kingdom
There was a problem filtering reviews. Please reload the page.
- Reviewed in the United Kingdom on 12 October 2023Use this as a remote for a light in the engine compartment of my boat. Works every time and has never let me down. Recommended
- Reviewed in the United Kingdom on 30 July 2025As described and delivered promptly
- Reviewed in the United Kingdom on 30 December 2020This is a nicely made little unit. It works well starting my diesel generator remotely. The box ix too small for all but the tiniest cables so I put it in a bigger enclosure. Also the instructions are less than useless!The media could not be loaded.
The use of ABCD for the 4 channels and then using ABC for the terminals is also stupid. For reference;
Looking at the unit as in the pics, the channels are ABCD going from right to left.
The terminals are A= Normally open, B=Common, C=normally closed. So for a simple ON/OFF switch use B and A They are all volt-free terminals meaning you can switch 12v, 24v , 110 or 240v.
The jumper has 3 possible positions. As supplied it is in self-latching toggle mode, ie one press for ON, another press for OFF. remove the jumper and you get momentary functionality, ie the channel is ON for as long as you hold the button down so this is good in starting applications. I have no idea what the third option is (Interlock) !
The wiring diagram for a DC motor is a little confusing but it's basically to show how to energise and then reverse a motor, eg for a garage door. So you are using channels A and B for UP/DOWN of the door. Jumper must be in momentary mode. Press A, motor is energised, press B and motor is energised with reverse polarity. You could use self-latching mode if you have end switches on the door runners. Standby current measured at 8mA, quoted 6 but still very low. This will flatten my genny battery in 83 days! I may disable the blue standby LED which serves no purpose. It's all 12v and Solar at this location.
I like this unit and have already thought of loads of other uses. I wish they did a 220v version...4 out of 5 because of lousy instructions, and I have only just fitted it so we will see how long it lasts...
- Reviewed in the United Kingdom on 15 October 2023Worked great to convert my wall switched electric garage doors to remote. I did two separate doors, you can do up to four. Great piece of kit
- Reviewed in the United Kingdom on 2 March 2020So, I ordered 2 of these as I thought they were great at a very good price. However, I am now returning them. I would leave a Zero Star rating if I could! The install, and instructions etc are all fine. They do work to a degree. My issue with these, is very similar to another review I read here very recently actually - The relays seem to have a mind of their own!! In just 24 hours, the damned relays turned themselves on at least 7 or 8 times. My car had a flat battery this morning, as ALL 4 relays had somehow turned themselves on and meant my external lights and other accessories were powered up for hours until the car went flat!! I then spent the day keeping an eye on my car as I was home all day - I connected a charger to my vehicle battery and watched it. My remote was left in the empty house (It was only myself home) and out the way... yet for no apparent reason, out of nowhere, the relays would suddenly turn on! No neighbours unlocking their cars, no passers-by -- no explanation other than faulty design or something.
So basically, these are useless. A remote control relay is pointless if it's just going to randomly turn itself on for no apparent reason. Also means, in my case, I can't trust the hardware and don't fancy coming back to a car with a flat battery after a days work. I've heard others having issues connecting these to garage openers (for example) and having the same issue! Coming home to find their garages wide open because the relay randomly turns on.
Utterly pointless and useless and a compete waste of money! I'm returning both of these as defective / faulty / not fit for purpose.
If anyone can recommend a better product, please do so by adding a comment to this review.
- Reviewed in the United Kingdom on 16 August 2018A great versatile unit that is easy to use and works perfectly at 7.2v. Good value for money, with good range.
- Reviewed in the United Kingdom on 11 February 2021Great remote control worjs very well one BIG down point. It Doesnt work 100 m away
I wanted to use it to turn a light on on my narrowboat the boat is 18.5m long i could not get the remot to cork consistently until i move to just under half that distance & this is OUTSIDE. If you are able to make & solder a larger aerial then you can just about achieve 16m distance..
So once agsin the 100m distane is a rather large over estimation.
- Reviewed in the United Kingdom on 19 January 2021Great product, could I suggest that the remote controls have better protection against pocket pressing? Switched the lights on by accident a number of times. I still love the kit though, well done
Product summary presents key product information
Keyboard shortcut
shift
+
ALT
+
opt
+
D
Product Summary: INSMA 433MHz 12V 4CH Wireless Remote Control Switch Relay Switch with 2 Transceivers and 1 Receiver for Windows, Garage Doors, Toys etc.
From INSMA
4.1 out of 5 stars, 197 ratings
Customer reviewsAbout this Item
- Change of operation mode: wireless remote control, On/Off control unit with 4 channel CH 433MHz radio switch with 2 transmitters.
- Good design: wireless remote control, extremely easy to install and use. Stable and reliable performance with high reception sensitivity (> - 105dBm). Using wireless coding technique, non-directional switch, do not disturb each other.
- Good signal, high sensitivity: wireless remote control, a strong signal can overcome walls, floors and doors and be controlled from anywhere within a certain distance.
- Intelligent Learning Mechanism: Wireless remote control, the learning code provides high security due to the low repetition frequency and relearning mode, which allows you to erase the old code and re-learn a new code when losing a remote control. It can support up to 16 different remote encodings.
- Wide range of applications: wireless remote control, wide range of applications, from simple main remote control to autonomous control such as windows, entrances, garage doors, alarm systems, lifters and so on.
Product description
Feedback
Did you find this product summary feature useful?





