Fantastic lightweight & compact mask. Doesn't obscure your vision and - compared to other respirators, isn't going to get knocked if you're turning your head in tight or confined spaces.
Glass wearers : This is also the first mask that I've come across (not that I've tried all of them out there!) that provides a really good seal around the nose and doesn't fog up your glasses when you breathe out.
If you're drilling, cutting, sanding or mixing then this respirator is perfect for keeping out even the finest dust and powder particles that you'll likely come across.
However, please note that this respirator is ONLY for dust/powder particles. It does NOT keep out vapours or odours of any kind. So, if you're paint spraying, near fumes or just simply work with a colleague who suffers from a flatulence problem, then you'll need the SPR503, SPR491 or SPR496 for vapours and gases.
As mentioned, this mask provides a really good seal, but make sure you're aware of the two sizes available : Small/Medium or Medium/Large.
Unlike another reviewer's review, the diameter of your head is irrelevant to the size of mask you'll need (that's what the adjustable straps are for). The key measurement for choosing your correct size is the distance from the bridge of your nose to the point of your chin [check the size chart in the description above].
Having said that, my nose to chin measurement is 120mm - as per the chart, I bought the S/M size but found it too small as my chin would pop out whenever I mimed to a song on the radio or secretly poked my tongue out at people.
The two different size masks differ by approx 10mm in height and 10mm in width.
The Medium/Large has a slightly different seal design around the chin area - with a hard rubber crease (actually less snug than the S/M which has a soft curve seal along the chin) but is a far better fit for me overall.
More time to return.
Buy today, and get extra peace of mind with extended Returns until 31st Jan 2022. See conditions.
More to consider from our brands
Page 1 of 1 Start overPage 1 of 1
More items to explore
Page 1 of 1 Start overPage 1 of 1
Compare with similar items
 | GVS SPM001 Elipse P3 Dust Mask Carry Case (Belt Holder), One Size, Blue | AstroAI Reusable Dust Face Mask with 7 Filters - Personal Protective Adjustable for Running, Cycling, Outdoor Activities( 1 Mask + 7 Activated Carbon Filters +4 Breathing Valves) | 3M Reusable Half Face Mask, Small, 6501QL, EN safety certified | GVS Filter Technology SPR405 Elipse Integra Safety Goggle + P3 Dust and Nuisance Odour Half Mask Respirator, Filters Ready Fitted, Medium/Large, blue | |
|---|---|---|---|---|---|
| Customer Rating | (965) | (294) | (24560) | (20) | (1) |
| Price | £21.99 | £11.48 | £14.99 | £30.49 | £42.99 |
| Shipping | FREE Delivery . Delivery Details | FREE Delivery on your first eligible order to UK or Ireland. Details | FREE Delivery on your first eligible order to UK or Ireland. Details | FREE Delivery . Delivery Details | FREE Delivery . Delivery Details |
| Sold By | Amazon.co.uk | Amazon.co.uk | AstroAI Corporation EU | Amazon.co.uk | Amazon.co.uk |
From the manufacturer
Protection levels and application
The Elipse dust filters are rated to P3, an high level of particulate protection. Each mask is provided with two replaceable filters, already assembled and ready for use.
- Metal fumes and dust
- Silica dust, asbestos, concrete, wood dust, cement and plasterboard
- Coal dust
- Fiberglass
- Powdered flour, wheat and feed treatment
- Powders and viruses
Elipse P3 half mask with replaceable filters
Soft, light, compact and resistant, it protects against dust and toxic fumes
Elipse P3 half masks, with replaceable filters. Offering high filtration efficiency. Light weight, comfortable, compact and durable, the Eipse P3 protects against all types of dust. The Elipse P3, designed and manufactured in the Uk by GVS, represent a major advance in mask design.
- Soft, light weight (132 g) and resistant
- Ergonomic and compact design
- Fits under welding hoods
- Comfortable and hypoallergenic
- HESPA P3 filters
- Compatible with safety glasses
- Replaceable and reusable filters
- Avaiable in two sizes, S/M or M/L
High level respiratory protection
|
|
|
|
|---|---|---|
HESPA FILTERS P3High Efficency Synthetic Particulate Airfilter - this filter technology is used on the whole Elipse range. The 7 layers of filtering fabric provide a mechanical filtration witch guarantees a minimum filtration efficiency of 99.95%. The filters are water resistant and replaceable. |
ERGONOMIC DESIGNA line of extremely light weight masks that offer superior comfort and fit. The mask compact profile ensures unrivalled line of sight, permitting the use of other PPE such us eyewear or hearing protection. The masks are made from medical grade, hypoallergenic and odour free material, free from latex and silicone. |
PROTECTION AGAINST NANO PARTICLESThe GVS Elipse P3 filters protect against nano particles and are tested up to 0.04 microns maintaining an efficiency of over 99.95%. Laboratory Internal (NFC House Vickers Industrial Estate - Mellishaw Lane, Morecambe - Lancashire LA3 3EN): Nano Particle Efficiency Test - 18/07/17 - 19/07/17 - Norms EN 143:2000+A1:2006 |
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| Elipse P3 filter mask | Elipse filter mask A1P3 | Elipse filter mask A2P3 | Elipse filter mask ABEK1P3 | Elipse filter mask Integra P3 | Elipse filter mask Integra A1P3 | |
| Pesticides | ✓ | ✓ | ✓ | ✓ | ||
| Paint Vapour | ✓ | ✓ | ✓ | ✓ | ||
| Silica Dust | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| Wood Dust | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| Asbestos | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| Cement Dust | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| Solvants | ✓ | ✓ | ✓ | ✓ | ||
| Moulds | ✓ | ✓ | ✓ | ✓ | ||
| Amonia based chemicals | ✓ | |||||
| Formaldehyde | ✓ |
Customers who viewed this item also viewed
Page 1 of 1 Start overPage 1 of 1
Featured items you may like
Page 1 of 1 Start overPage 1 of 1
Customer Questions & Answers
Customer reviews
Top reviews from United Kingdom
There was a problem filtering reviews right now. Please try again later.
Reviewed in the United Kingdom on 12 May 2019
Glass wearers : This is also the first mask that I've come across (not that I've tried all of them out there!) that provides a really good seal around the nose and doesn't fog up your glasses when you breathe out.
If you're drilling, cutting, sanding or mixing then this respirator is perfect for keeping out even the finest dust and powder particles that you'll likely come across.
However, please note that this respirator is ONLY for dust/powder particles. It does NOT keep out vapours or odours of any kind. So, if you're paint spraying, near fumes or just simply work with a colleague who suffers from a flatulence problem, then you'll need the SPR503, SPR491 or SPR496 for vapours and gases.
As mentioned, this mask provides a really good seal, but make sure you're aware of the two sizes available : Small/Medium or Medium/Large.
Unlike another reviewer's review, the diameter of your head is irrelevant to the size of mask you'll need (that's what the adjustable straps are for). The key measurement for choosing your correct size is the distance from the bridge of your nose to the point of your chin [check the size chart in the description above].
Having said that, my nose to chin measurement is 120mm - as per the chart, I bought the S/M size but found it too small as my chin would pop out whenever I mimed to a song on the radio or secretly poked my tongue out at people.
The two different size masks differ by approx 10mm in height and 10mm in width.
The Medium/Large has a slightly different seal design around the chin area - with a hard rubber crease (actually less snug than the S/M which has a soft curve seal along the chin) but is a far better fit for me overall.
Verified Purchase
Lightweight, compact, comfortable AND a good seal.
By SookSook on 12 May 2019
Fantastic lightweight & compact mask. Doesn't obscure your vision and - compared to other respirators, isn't going to get knocked if you're turning your head in tight or confined spaces.By SookSook on 12 May 2019
Glass wearers : This is also the first mask that I've come across (not that I've tried all of them out there!) that provides a really good seal around the nose and doesn't fog up your glasses when you breathe out.
If you're drilling, cutting, sanding or mixing then this respirator is perfect for keeping out even the finest dust and powder particles that you'll likely come across.
However, please note that this respirator is ONLY for dust/powder particles. It does NOT keep out vapours or odours of any kind. So, if you're paint spraying, near fumes or just simply work with a colleague who suffers from a flatulence problem, then you'll need the SPR503, SPR491 or SPR496 for vapours and gases.
As mentioned, this mask provides a really good seal, but make sure you're aware of the two sizes available : Small/Medium or Medium/Large.
Unlike another reviewer's review, the diameter of your head is irrelevant to the size of mask you'll need (that's what the adjustable straps are for). The key measurement for choosing your correct size is the distance from the bridge of your nose to the point of your chin [check the size chart in the description above].
Having said that, my nose to chin measurement is 120mm - as per the chart, I bought the S/M size but found it too small as my chin would pop out whenever I mimed to a song on the radio or secretly poked my tongue out at people.
The two different size masks differ by approx 10mm in height and 10mm in width.
The Medium/Large has a slightly different seal design around the chin area - with a hard rubber crease (actually less snug than the S/M which has a soft curve seal along the chin) but is a far better fit for me overall.
Images in this review
Reviewed in the United Kingdom on 29 January 2019
Verified Purchase
Reviewed in the United Kingdom on 14 January 2020
If you do wear it for an hour or so, you will find there is some condensation in the mask when you take it off. I supposed it's natural with exhaling and so forth.
Added photo to show how much dust is collects and prevented me from inhaling it.
Verified Purchase
Works really well.
By Robert Bate on 14 January 2020
I got this because I work in a stable yard and when we do the hay there is a lot of dust. I usually get all stuffy nose and have coughing fits. This item surprised me by not just being effective, but also by being very comfortable. The silicon rubbery type material makes that it molds to your face, creating a seal.By Robert Bate on 14 January 2020
If you do wear it for an hour or so, you will find there is some condensation in the mask when you take it off. I supposed it's natural with exhaling and so forth.
Added photo to show how much dust is collects and prevented me from inhaling it.
Images in this review
Reviewed in the United Kingdom on 5 June 2018
Verified Purchase
Reviewed in the United Kingdom on 4 February 2018
Verified Purchase