Wind Noise Reduction Door Seal Kit

Custom Cut for Model 3

Front Door Installation Guide
—The front door seals are one-piece designed according to the shape, so you can stick the seal along the edge much easier. Attention: please not cover the water drainage holes while installing, you can make a cut on the seal so it won't cover the drains.

Rear Door Installation Guide
—When installing the rear door seal, make sure the wrap angle is up and the the lip is facing outside the car. Attention: please not cover the water drainage holes as well, otherwise it will collect water in the doors after the rain.

A Pillar Installation Guide
—First, measure the length you will need and then cut off the extra length. Stick the seal down from the top of the door to the end of the door, half of the z-type seal should be attached to the door and the other half should be exposed.

B Pillar Installation Guide
—Measure it as how much material you’re gonna need and then stick the seal along the edge - the wrap angle should be up.

Temperature resistant material
Made of high-quality EPDM rubber, good heat and cold resistance. The operating temperature range of the seal strip is between —40 and 140°C (—40 and 230°F).

Fit Perfectly
The door seal kit is perfectly fit for Tesla Model 3 all model. It will enhance the tightness of the door, help reduce the wind noise, and improve air conditioner performance, provide a quiet driving environment.

Essential Accessory for Tesla Model 3
One of the most complains of Tesla Model 3 is the road noise. In the effort to reduce the noise especially on highway, you may need to proceed to add more seals to your Model 3. The add-on seal strips will not only reduce the decibel sound on the highway but also to improve the air conditioning performance and protect against drafts, moisture, dust.