Eletronic 4 channels Flash Trigger for Canon 380ex,420ex,430ex,550ex,580ex,Canon 50D,40D,30D,5D,1Ds,1000D,500D,450D,400D,S5-IS.Nikon D700,D300,D200,D80,D70s,D60,D40,D40x,SB800,SB600,SB50,SB28,Sigma 500,Fuji S100/1000fd,S8100fd,S8000,Fuji S5 S3 DSLR cameras + Two extra receiver
We don't know when or if this item will be back in stock.
- Enter your model number above to make sure this fits.
- This wireless trigger is control discreteness for camera to trigger hot shoe flashgun synchronously.
- This flash tregger is not suitable for Canon flashguns, such as 380/420/430/550/580ex.
- This principal works by one transmitter and one receiver. It can trigger 2 flashes at the same time.
- The signal transmitter can transmit the wireless signal that is being encoded,
- the receive work with a CR2/3V battery, and decode with a microprocessor
User instruction: 1. Make sure the transmitter and the receiver are at the SAME control channel. On the transmitter, the blue DIP switch of channel setting is on bottom side; on the receiver, the channel setting switch is inside the battery compartment. By channel setting, you can group the flash equipment into channel 1, 2, 3 or 4, and then switch the transmitter into channel 1, 2, 3 or 4 to control the different lighting group. 2. Insert the X Sync Cord into the PC terminal of the receiver, insert the 1/4" (6mm) or 1/8" (3mm) phone jack plug into the jack of your flash equipment, then switch on the receiver. 3. Press the TEST button of the transmitter to confirm operation of the flash equipment in the chosen configuration before taking photography. 4. Connect the transmitter with your light meter by the X Sync Cord. Press the metering button of the light meter to meter light. Please make sure the shutter speed is not more than the max Sync speed of your camera. Adjust the light output of the flash equipment if needed, then meter light again. Disconnect the transmitter with the light meter. 5. Mount the transmitter on the camera hot shoe. If your camera does not have a hot shoe but have a PC terminal, then connect the transmitter with the camera by the X Sync Cord. Feel annoying by connect and disconnect the transmitter with the light meter or the camera? We strongly recommend you buy an additional transmitter. Thus you can have one transmitter for the light meter and on for the camera! 6. Set the camera into M mode, and then set the desired shutter speed and metered aperture value. Now you can trigger the flash equipment by press the shuttle release button of the camera to take pictures. Package Includes: 1x Transmitter 2 x Receiver 2 x Receiver batteries In the list, the flashgun is not included
Top Customer Reviews
The performance is fairly consistent, although I have noticed the first frame fired from starting the shoot may not fire but the 2nd onwards is regular. While the expensive Pocket Wizards are obviously going to be 100% guaranteed I'm prepared to risk losing that first frame - (I'm likely to shoot several variations anyway) because at this price you get what you pay for and these units are generally pretty good and despite the attaching issues there are at least cost effective work-a-rounds for the keen budget minded strobist.