Duronic TVB123S Heavy Duty Adjustable Black Wall Bracket For Plasma, LCD & LED Screens For 22" - 37" Wide Screens VESA: 200, 100 - With Tilt down
|You Save:||£75.00 (94%)|
- Enter your model number above to make sure this fits.
- Fits almost all 22"- 37" LCD/LED/Plasma/3D TV, subject to TV being correct VESA, TV is larger than bracket and TV weighs less then 30KG
- Please measure the height and width of TV and make sure it's bigger than the bracket size, also check the horizontal mounting holes at the back has a width of Max: 200mm and Height 200mm. Anything 200X200mm or less is fine
- (-12) degrees Tilting which will allow you sometime to install slightly higher and angle the view downwards
- Low Profile, only 3cm from the Wall. Perfect for rooms where you don't want the TV to come out from the wall too much
- Most new TV's weight 20-30KG. This bracket has a MAX weight of 30KG
Frequently Bought Together
Customers Who Bought This Item Also Bought
Size: TVB123S VESA 200x200 MAX
The Duronic TVB123S is a solid TV bracket that will fit all of the major TV brands on the market. Our TV brackets are made of strong cold steel to give the best heavy duty results that customers look for. The Duronic model does not protrude too much from the wall so it does not eat into your room space. Once installed the distance between the wall and TV is only 3cm
Make sure this bracket is designed for your TV by checking the following:
Your TV should be a size between 22" and 37"
Have a VESA of MAX 200 x 200. This is the horizontal distance between the holes at the back of your TV x the Vertical distance of the holes at the back of your TV.
Our brackets include a manual for you to easily follow and install the bracket. It comes with all the screws for fittings that fit 99% of TV's. All you need is a drill, a long screwdriver, and a helper to get the TV up on the wall.
Once the bracket arms are put on the TV you can adjust the tilt level you need before hanging it on the wall. You can have up to -12 degrees tilt for enhance viewing angle if the TV is mounted at a height. Our bracket also has safety screws on the arms which when tightened the TV will stay secure on the bracket.
What do customers buy after viewing this item?
Top Customer Reviews
There could be a problem with space for HDMI plugs if you have a 3D TV due to the NEED for v1.4a HDMI leads, and no swivel or right angled ones available at the time of writing. This bracket has enough room to cope.
This bracket is superb, easily strong enough, and comes with a multitude of fixings.
Also, you WILL need angled connectors to attach your HDMI/phono/RF/SCART leads if the connectors are on the back of the TV. These are, however, very inexpensive elsewhere on this website.
Only pitfall, and the reason I removed a star, once mounted and TV attached it is very awkward to tighten the two screws on the bottom that hold the TV in place. The gap is minimal and you will need a very long screwdriver, or a friend with very small hands.
Apart from this relatively minor grumble, this is a great budget solution and I am confident that my TV is safely installed :)
Amazing value for money. Didn't want to spend too much but after lots of good reviews I thoughtI would give it a go.
I would suggest you connect the scarts etc before putting TV up as not much hand room space to connect
Looks good when fitted
When using with 600x400 vesa TVs, the mount is too neat in size. There is no play either side of the the bracket so extra care should be taken when installing as a slight knock to the side would send it crashing to the floor.
The screws used to tighten and secure TV to bracket are very hard to get too when fitting a 60" TV. I had to use an extra long screwdriver to reach them which most people wouldnt have lying around.
Overall good value for money, but id say if you plan on using it for a 50"+ TV maybe look at a bigger one.
Update: The TV has now been on the wall for a few months and it looks great, the slight tilt on it is really useful as we've had to mount it higher than we'd like to get it out of reach of small fingers! My husband was able to mount it quickly, it's fairly close to the wall and therefore allows you to access the sockets in the side without having to take the TV off the wall. I am certainly not disappointed and am pleased I didn't pay more money for the Samsung own version. I have recommended this to anyone who has mentioned they might buy a wall mountable TV.
Most Recent Customer Reviews
Good. Mounted on a wall our TV and took the old TV stand to garage.Published 3 days ago by Nicholas Harper
Does exactly what needs to good prive and more importantly good sturdy qualityPublished 4 days ago by kevin reid
Not bad does the job but feels cheap and metal is very thin - poor design for the bottom rail lock you will need a very long cross head screwdriver to do these up - I would... Read morePublished 9 days ago by mark
Not as heavy duty as I was expecting but does the job it was brought forPublished 12 days ago by Amazon Customer
I gave it a three because it took me 3 days to find the right screws for my TVPublished 13 days ago by Eric N
Holds 50inch tv well, easy to put up although the built in level had to be moved around a bit to get it right. Found no issue with space behind to put in cables. Nice abs sturdyPublished 17 days ago by KK
Purchased with samsung ue55ku6000 with a vesa of 40x40. This bracket just about fits in the vesa area. Uttlerly disappointed with this product. Read morePublished 19 days ago by Rossco