600mm(w) x 1800mm(h) Curved Chrome Heated Towel Rail, Radiator, Warmer 3479 BTUs Bathroom Central Heating Ladder Rail
- Outer Finish: Sparkling Chrome. Base Material: Mild Steel
- Height: 1800mm Width: 600mm
- Pipe Centres: 555mm, Bar Pattern: 4-5-6-7-11
- Output Value, BTUs: 3479. Output Value, Watts: 1020
- Projection from Wall: 90-110mm (Adjustable Brackets)
Customers who bought this item also bought
What do customers buy after viewing this item?
The 600mm (w) x 1800mm (h) towel rail has a high quality chrome plated finish with 22mm straight bars. We have designed the bar patterns of the towel rails to optimise the volume of horizontal bars (22mm Diameter) for improved heat outputs and spaces for functionality to allow you to hang your towels. The high heat output of our towel rails are achieved from the sourcing of high quality steel finished with over 50 microns of chromeProduct Description
• Sparkling Chrome Plating
• Material: Mild Steel
• Tube Diameter: 22mm
• Guarantee: 10 Years BS EN 442
• Accessories: Bleed Valve & Blank Plug
• Pipe Connection: 15mm
• Four point wall fixings
This towel rail can be installed in 3 different ways
• On a central heating system when fitted with a pair of suitable valves (Angled or Corner Valves for pipework coming from the wall, Straight Valves for pipework coming up floor.)
• As stand alone electric when pre-filled with solution and fitted with a suitable wattage electric heating element
• As a dual fuel towel rail when purchased with a suitable dual fuel valve kit
Please Note: - All our heat output figures (BTU'S) are listed at Delta T50. Please do not compare this product with cheap imports, which will be aesthetically less appealing, manufactured with thinner tubes, have a poor finish and a reduced heat output. For further information do not hesitate to contact us and one of our technical team will be happy to help!
Top customer reviews
This is the element I used made by the same supplier: Heated Towel Rail / Radiator Electric Element 600W Watt
I also used a Heated Towel Rail Temperature controller White TCP200 with 2 hour boost to control the electric element: Heated Towel Rail Temperature controller White TCP200 with 2 hour boost
It replaced a standard central heating radiator with pipe centres of 500mm. The pipe centres of this product are 555mm and I've added a picture below of of how I used this product with a dual fuel T piece: iBathUK | T Piece Element Connector Part for Dual Fuel Thermostatic Electric Radiator).
Hope this helps someone in the same situation.
And the best price online.
As a comparison, I have a single panel 600mm radiator in the room next door to our en-suite, which is slighter larger in size, and we actually have to turn this radiator down to about 3.5 as the room gets too hot otherwise, and this radiator has a BTU rating lower than this towel rail.
I have tried contacting NWT via email, to ask them for advice on what to do, with no response. I have also asked two different plumbers to take a look and see what they think, and they both couldn't understand why the rail was almost too hot to touch, but yet radiated almost no heat. So I'm left with a lovely looking wall ornament, as I now just bring a fan heater into the en-suite to heat the room, until such time as I can manage to lift our newly laid floor, and replace our new wall tiles, so as to fit an actual radiator that will heat the room.
Most recent customer reviews
It look good but my plumber hasn't fitted it just.