Currently unavailable.
We don't know when or if this item will be back in stock.

Have one to sell? Sell on Amazon

Corsair Force Series 3 CSSD-F60GB3A-BK 60GB Solid State Drive

4.7 out of 5 stars 3 customer reviews

Currently unavailable.
We don't know when or if this item will be back in stock.
    This fits your .
  • Enter your model number above to make sure this fits.
  • Sequential read speeds of up to 525 MB/s
  • Sequential write speeds of up to 490 MB/s
  • SATA 6Gb/s (SATA 3) connectivity
  • High performance SandForce SF-2200 SSD controller
  • Native TRIM support (O/S support required)
Currently unavailable. We don't know when or if this item will be back in stock.

Special Offers and Product Promotions

Product Information

Technical Details
Item Weight227 g
Product Dimensions17.8 x 12.7 x 2.5 cm
Item model numberCSSD-F60GB3A-BK
SeriesForce Series 3 60GB A-spec
Memory TechnologyMLC
Hard Drive Size60 GB
Hard Drive InterfaceSerial ATA-600
Operating SystemYes
Software IncludedYes
Additional Information
Best Sellers Rank 179,709 in Computers (See top 100)
Shipping Weight159 g
Date First Available3 Oct. 2011

Product Description

Product Description

One of the best PC performance investments you can make.
You'll be amazed at the improvement over traditional hard drive access times the first time you turn on your computer, and for virtually everything you do with your PC. System startup, application load times, data transfers, and even shutdown times are all faster.

Your system will be more responsive, and you'll be more productive.
Add up all the time you spend all day waiting for your computer — starting up, loading game levels, saving large files and documents — and it can be significant. Using a PC can be a lot more enjoyable when it's not always making you wait.

Great for the latest high-performance PCs.
There's fast, and then there's fast. Force Series 3 SSDs have even quicker read and write times when they're installed in PCs that use the latest SATA 3 interface.

Compatible with SATA 2 3Gb/s.
Haven't yet moved to SATA 3? Like all Corsair components, Force Series 3 SSDs are designed to last through several system upgrades. Adding a Force Series 3 today means that you'll still get incredible storage performance now, and your SSD will be ready for your next upgrade.

The cost-effective SATA 3 SSD solution.

Choosing a Force Series 3 SSD helps your computing budget go farther. They deliver outstanding SATA 3 6Gb/s performance, with prices that are comparable to lower-performance SATA 2 3Gb/s solid-state drives.

TRIM Support
Force Series 3 SSDs feature support for the Windows® 7 TRIM command. This allows them to store only the data they need and perform memory optimization to ensure the fastest possible write speeds.

Because SSDs have no moving parts, they can handle shock, vibration and temperature changes far in excess of traditional hard drives. That's important for desktop PCs, and essential for notebooks.

Cool and Quiet, with Low Power Consumption
Traditional mechanical hard drives spin at thousands of revolutions per minute. This takes power, and generates noise and heat. Since SSDs have no moving parts, there's no noise or vibration, and the lower power consumption helps keep things cool inside your PC.

3.5" adapter
The 2.5" form factor allows for installation in most notebook PCs with no adapter required. If you're adding a Force Series 3 SSD to your desktop PC, use the included 3.5" adapter to mount it in any standard hard drive bay.
Otras características:
Data transfer rate: 6 Gbit/s
Depth: 13.7 cm
Height: 2.997 mm
Linux operating systems supported: Yes
Mac operating systems supported: Yes
Manual: Yes
Maximum non-operating altitude: 12192 m
Maximum operating altitude: 3048 m
Memory type: MLC
Operating temperature (T-T): 0 - 70 °C
Operating voltage: 5 V
Power consumption (standby): 0.5 W
Power consumption (write): 2 W
Protection features: Shock resistant
Quick start guide: Yes
RAID support: Yes
Read speed: 550 MB/s
S.M.A.R.T. support: Yes
SSD form factor: 2.5"
Solid-state drive capacity: 60 GB
Solid-state drive interface: Serial ATA III
TRIM support: Yes
USB powered: No
Weight: 80 g
Width: 11.1 cm
Windows operating systems supported: Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64
Write speed: 490 MB/s

Box Contains

Box Contains: 1 x CSSD-F60GB3A-BK, 1 x 3.5” Adapter

Customer Questions & Answers

Customer Reviews

4.7 out of 5 stars
5 star
4 star
3 star
2 star
1 star
See all 3 customer reviews
Share your thoughts with other customers

Top Customer Reviews

Verified Purchase
Bought two Corsair Force 3 60 GB SSD to use as my system disk in RAID 0 and I must say I'm extremely happy with the result. My only regret is that I didn't buy the 240 GB ones (they were way too expensive for me at the time).

Obviously using SSDs instead of HDDs works out to be quite a bit more expensive GB for GB, but once you've made the change you'll never want to go back.

I suppose the overall performance also depends on your computer configuration. Mine are connected to an Crosshair IV, Phenom II x6, 16 GB DDR3 & 2 x HD 6850 in crossfire.

The benchmark results using "CrystalDiskMark 3.0.1 x64" are as follows:

Sequential Read : 329.146 MB/s
Sequential Write : 133.969 MB/s
Random Read 512KB : 314.903 MB/s
Random Write 512KB : 126.460 MB/s
Random Read 4KB (QD=1) : 21.773 MB/s [ 5315.6 IOPS]
Random Write 4KB (QD=1) : 89.382 MB/s [ 21821.8 IOPS]
Random Read 4KB (QD=32) : 40.348 MB/s [ 9850.6 IOPS]
Random Write 4KB (QD=32) : 101.001 MB/s [ 24658.4 IOPS]

Test : 4000 MB [C: 94.9% (104.3/109.9 GB)] (x1)
Date : 2012/08/31 14:36:12
OS : Windows 7 Ultimate Edition SP1 [6.1 Build 7601] (x64)

When I first made the change, it didn't seem that great a difference (apart from instant on, when you return from sleep). You really notice the difference when you have to use a computer with HDD for a while and then go back to SSDs. Everything is just smoother and quicker. I suppose it's a bit like boosting your bandwidth, you never want to go back to a slower speed. Prices of SSDs have dropped quite a bit, whereas HDDs still remain high after the price hike last year, so it's becoming an ever more attractive option.
Comment Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
When this I booted this after having installed the OS, it was so fast I almost wet myself. Boot time is around 12 seconds and shutdown is around 8. This is pretty good considering the amount of junk I have. Anyway, set up is simple - I didn't even have to go into the bios. But be wary of the low capacity, its only 60gb and by the time you install win7 or whatever OS you want, it eats up a lot of space. I installed steam, win7pro, itunes, photoshop and [...] and I only have 3.63gb left. If you're just looking to speed up your pc and just put the OS system and nothing else this is fine capacity wise with a good read/write speed (windows experience index gives it 7.3/7.9). If you want to store more than the OS and a few files on it, get 120gb as the 60gb just fills up to quickly. I've also got a 1tb samsung spinpoint F3 (very noisy) to store the bulk of my files and they are working side by side just fine.
Comment One person found this helpful. Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
Verified Purchase
I have been using these solid state drives for very long time. It is very stable, fast and cheap. Build quality is not giving the user that solid feeling. Outer case of the drive is thin and you can feel it by touching. Still this thin case doesn't effect the speed and I think it helps the cooling a bit. Also who would touch or squeeze the drive while it is operating? :)

I have been used this drive with sata2, sata 3 ports without any problem. Tested operating modes are IDE, AHCI and RAID 0,1,10,5. Drive was working very good.

This drive deserves to have 5 stars.
Comment Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse

Most Helpful Customer Reviews on (beta) 4.3 out of 5 stars 99 reviews
203 of 219 people found the following review helpful
4.0 out of 5 stars With the right tweaking, this is a great drive. 16 Feb. 2012
By Bexter - Published on
Verified Purchase
Firstly, I want to start by saying that I KNOW what I'm doing with technology as I've worked with it for well over 20 years now, so what I'm about to post doesn't need trolling from 16 year olds who think they know better. Secondly, this review is mostly for those who either haven't worked with SSD's before or are having trouble getting this drive to play nice on their SATA controllers.

The thing to understand about SSD's is that while they are VERY fast, they are also still in their infant stages. With this drive in particular, this is what you need to do to make sure that it performs the way it should.

1. Make sure that the cable you use to connect to your motherboard is at LEAST a SATA-2 cable. A vanila motherboard SATA cable is more than likely going to be SATA-1 and this drive will complain about it with failures and whatnot.

2. Make sure your motherboard has the SATA port you connect this drive to configured as AHCI in the BIOS and NOT RAID or Sata. The primary reason for this is that most motherboard built in controllers are not really well built to start with and were NOT built with SSD in mind.

3. On some boards (Gigabyte, MSI & a few others), you can NOT use RAID and SATA combos on the same controller with this drive. As an example, the GPA880FX-UD3H board sports two different controllers... 6xSATA-3 and 2xSATA-2. You have the option (BIOS updates) to set the 6 way controller to do a mix of RAID and AHCI. This is great for conventional HD's but the Corsair WILL pitch an absolute fit about it. The easy solution for this is to put the SSD on the 2nd controller by itself in AHCI mode while your RAID array sits on the first controller.

4. Some FACTS about marketing with SSD's. This drive, like many others is listed as a SATA-3 drive. Sounds impressive and fast, but the sad reality is that NO SSD ON THE MARKET CAN GO 6GB's PER SECOND. It will probably be a little while before the real need for SATA-3 is even realized. So basically, if you have a SATA-2 board, you'll be just fine. I have one myself so I can tell you that it's still super fast on SATA-2 and there would is no real improvement on a SATA-3 system, which I also have.

5. If you get an SSD, do NOT go crazy trying to put all of your applications, music, videos, games, etc on this drive. Make this your OS drive and leave it at that plus a few applications (MS Office, WinAMP, etc.) There is an actual reason for this. As SSD's get full with data, they try to spread the date out in a, for laymens sake, shower pattern on the drive itself. Conventional hard drives try to go in a straight line, as much as possible. Without being TOO technical, this is one of the reasons SSD's are much better for short term storage rather than long term archival. The problem comes in when the SSD is near capacity, it'll start to slow down since it has to recall these data block from different places in the storage chips. The general rule is to only use up to around 80-85% of the USEABLE space on the drive. This gives the drive the room it needs to clean itself up and keep your data fetch times very low (5ms or around there).

6. If you're going to use this drive for a Windows 7 machine that already has a partition in place, after you've gotten everything moved and working, MAKE SURE TO RUN THE SYSTEM PERFORMANCE TEST WITH WINDOWS AGAIN. This will tell Win7 that it's now using an SSD drive and turn on appropriate services such as TRIM (you WANT this) and turn off others like caching (you don't really need this with an SSD). You will probably also want to turn off the hibernate feature of your computer once you're using this drive as an OS drive. The truth is this drive (once configured correctly) is nearly as fast in startup/shutdown as conventional hibernate and in rare cases, it's actually faster.

This is probably the best starter advice I can give to anyone looking to plunge into the SSD pool. If this has helped anyone, I'm glad.
61 of 64 people found the following review helpful
5.0 out of 5 stars Effortless Install, Effortless Performance and Corsair Redeems Themselves 10 Dec. 2011
By Canis Majoris - Published on
This is a duplicate of my review that was posted on the older F120GB3-BK model. My original review was of the newer F120GB3A-BK--this model--, and is more appropriately included here but; I will leave the other one up because it still applies.

We have all read the reviews. If you want an SSD you have these choices:

1. If you want reliability at a premium price get either Intel or Crucial.

2. If you want to take more of a risk for a lower price and maybe higher speeds go with Corsair or OCZ.

3. Sandforce controllers should make the drive perform faster, but have issues and should be avoided until the bugs can be fixed, right?

Because of a very good price on the 120GB Corsair Force 3, I finally bought an SSD to install in my Dell laptop. I knew I wanted to eventually get an SSD for the sole reason of seeing the greatest performance increase you can do, basically, if you had to upgrade one thing. I knew nothing of what to optimize, what to tweak, or how to specially install an SSD other than putting it in, and loading Windows like I normally do to a new drive. Fortunately, this was all the information I needed to see the improvements that everyone else has seen when going with an SSD.

**I used this SSD on a Sata III port in my laptop**

Note that I am using firmware 1.3.2, and did not upgrade to 1.3.3. Corsair stated that, unless you had problems with the 1.3.2, there was no reason to upgrade to 1.3.3.

**When you are buying this SSD, make sure you note the -model- number** In this case my model # was CSSD-F120GB3A-BK. The *A* is important, because that means the SSD is preloaded with 1.3.2 firmware and is likely the newly 'revisioned' drive. Look for this on the box when you receive it. If you do not have an A at the end, upgrade to 1.3.2, or 1.3.3, as soon as you can to minimize anything going wrong.

I wanted to use this drive as a primary boot drive (the drive that loads and boots into Windows). After installing the drive in my laptop, I switched the SATA controller (as your computer is starting up you have to press an F key--which usually shows on the screen--to get into the BIOS) to AHCI, and booted to a USB Flash Drive (I had a Windows 7 .iso, or CD, on a 4gb flash drive though you could alternatively use a Windows install DVD/CD). **The reason for having Windows on a thumb drive is because of the quickness of using Flash to install on Flash (your SSD)** The complete Windows installation took about 15 minutes whereas it usually took around 45 minutes on a normal harddrive. This is your first taste of how your computer has increased its performance. During the installation I had 0 problems.

Doing a fresh install of Windows on your new SSD is the same process as if you formatted a harddrive and started from scratch to restore from system discs. Make sure, though, if you have the option, to enable AHCI mode under SATA Controllers in your BIOS before using the SSD.

After Windows had been opened for the first time, I installed the drivers for my system and was finally able to restart after each program 'install' and not worry about losing a lot of time. You know everytime you install a driver it asks to 'reboot now'? Well, with an SSD you will not have to say to yourself, "But do I really want to waste a minute or two letting Windows shut it self down and restart all over again"?

[---Bootup Times---]
Complete shutdown to bootup time was 30 seconds.
Startup time after immediately pressing power button is around 23 seconds.
Shutdown time is 4-5 seconds.

After installing drivers I ran Windows Experience Index. This drive scored a 7.9--the maximum score available--under 'Primary Hard Disk'. I have heard that you should run the WEI with an SSD as soon as you can because it is at this time Windows recognizes your SSD as an SSD. Why is this important? Because Windows 7 will then disable Defrag, Readyboot and other non-constituent performance tweaks. It will also enable the much needed TRIM. Also I would search online for further tweaks that you can use to improve your SSD performance even more.

Now because I wanted hard data on what speeds I was getting from the Force 3, I installed ATTO and PerformanceMark. Here are the numbers:

[---Actual Performance Numbers--]

*PerformanceMark takes a composite score that rates a drive based on its Sequential Read/Write/Random Seek speeds.*

Performance Mark Disk Mark was around 3550.

To put this number into perspective: the highest average Disk Mark number on PerformanceMark's website is 3512. Going by their website, my Corsair Force 3 Disk Mark score is as good as it gets right now.

[---PerformanceMark numbers for competitors---]:

Intel 510 Series 120 GB SATA Version 3 2.5-Inch Solid-State Drive is 2,263

Crucial 128 GB m4 2.5-Inch Solid State Drive SATA 6Gb/s CT128M4SSD2 is 2,063

ATTO Scores were close to what is advertised under the specifications listings. Read was close to 550mbps max and Write was close to 500mbps.

I will add too that I usually put my laptop into sleep mode about 20-25 times a day. Having this drive for a little bit now, I can safely say that there have also been 0 problems when coming out of sleep. This review will be updated if anything changes.

One thing I have noticed too after upgrading to the SSD is that my laptop fan never comes on when I am just using the web checking e-mails, or streaming videos. If I close my eyes, I cannot hear anything that would let me know my laptop is on. Did I mention too, that this also transfers to the heat at the bottom, most likely on your lap. It does not even feel warm to the touch anymore. Probably just lukewarm.

Want another reason to take a risk with Corsair? Their excellent customer service and warranty program. If you did happen to get a bad one, you would be covered--for 3 years as per their warranty. The latter is one of the reasons I took a risk with Corsair even with unfavorable reviews. Because my drive is reliable, and it produces outstanding performance numbers, the little risk that may have been involved has since turned into a huge reward.

[---My Recommendation---]

Because I found the Force 3 at such a low price, I did not consider the Force 3 GT however; the price of the Force GT, as of right now, is close enough to the Force 3 that the extra dollars (in this case around 30$ more) is worth it to buy the Corsair Force Series GT 120 GB SATA 2.5-Inch SATA III Solid State Drive (CSSD-F120GBGT-BK). The latter will come close to doubling the performance gains of the Force 3 in *real world* usage. The stated specifications will seem to be the same, but the performances you see will be better with the Force GT. If you have never had an SSD and the price gap between the Force 3 and Force GT is greater than 50$, go with the Force 3. If the gap is less and/or you want the absolute best performance an SSD can give you right now, buy the Force GT.
7 of 8 people found the following review helpful
5.0 out of 5 stars Absolutely amazing 10 Aug. 2012
By Zach - Published on
Verified Purchase
I love this drive! It runs incredibly fast, giving me a total boot time (including the BIOS and POST screens) of about 20 seconds. Here's a short guide for you on how to do this.

1: Configure your BIOS to run the SATA controller in IDE mode.
2: Do a fresh install of Windows onto the SSD.
3: After installing drivers and stuff, download a nifty tool from Microsoft. It's called "Microsoft Fix It". Go to Microsoft's web page and look for "STOP 0x0000007B AHCI". Click on the first option. Scroll down to the Microsoft Fix It picture-thing and click on it. Run the tool and it will allow Windows to run in AHCI mode.
4: Reboot the computer and change the SATA mode from IDE to AHCI. If your controller has multiple interface options, make sure that ALL channels are set to AHCI. For instance, my Gigabyte motherboard (GA-A75-D3H) can run SATA 1, 2, and 3 in one mode (IDE, RAID, or AHCI), and run SATA 4 and 5 in a different mode simultaneously. I had to change the SATA 1, 2, and 3 to AHCI, then select "As SATA type" for the last 2 channels.
5: Now to enable TRIM. TRIM keeps the drive running fast and clean, so it's something you want. Open command prompt as an administrator and type: fsutil behavior set disabledeletenotify 0
6: Run the Windows Assessment and bask in the glory of a perfect 7.9 for the primary disk drive.

I cannot overstate how great this thing is. If you decide to leave it in IDE mode, it will slow down a bit, but it will still be a whole lot faster than a traditional 7200RPM disk drive.

Edit: This drive reads and writes randomly, meaning if you analyze it with a defragmentation program, it will come up extremely fragmented. THIS IS NORMAL. Never defrag an SSD, as defragmentation greatly reduces the life of the drive. Windows 7 automatically turns off defragging for SSD's (as long as they are not in a RAID array), but the other Windows OS's don't. Be very careful of this. Search your computer for a defrag option and turn it off for the SSD. The internal Sand Force controller divides the data up evenly between all the ROM chips within the drive, and defraging places all the data on one chip, placing a huge burden on a single part of the drive. Again, defragging SSD's just kills them, and it sometimes reduces the performance, too.
8 of 9 people found the following review helpful
5.0 out of 5 stars 3x Corsair Force3 90gb Raid 0 28 Dec. 2011
By MC0311 - Published on
I have 3 of these drives set up in a software raid on my Asus Crosshair IV. Running ATTO Disk benchmark on Windows 7, I am getting 1020MB/s Read and 1100MB/s Write speeds. I never have any crashes and I have had this set-up for a couple of months now with no issues or BSODs. Needless to say, I can fully recommend this drive!
4 of 4 people found the following review helpful
5.0 out of 5 stars 2011 MacBook Pro and Lenovo Laptop Drive. 6 Aug. 2012
By WyzrdX - Published on
Verified Purchase
I bought this Force 3 drive in February 2012 for the sole purpose to install in my 13" Early 2011 MacBook Pro. I will start with it.

Installation was straight-forward as expected. Once the MBP was closed I re-installed Lion(I wanted a fresh install), I then used my Time Machine BU to restore programs and settings. I had done this before with a traditional HDD and the whole process took more than an hour. With this Corsair It only took about 20 Min, including the restore.

Once the restore was done I shut down and performed a cold start. Now anyone that owns or has owned an Apple computer knows the initial screen, for a few seconds, is just getting the computer ready to boot. Once the Apple was on the screen I started a timer. From off to completely usable it only took 13.7 seconds. I started Adobe Photoshop CS5 in about 3 seconds.

Next I performed a hot restart. With 7 apps open I restarted the machine. Now Lion allows for the automatic reopening of everything opened when restarted. To shutdown and restart while opening the 7 apps, it took 16.6 seconds.

Next I ran Drive Genius to check what my speeds were. This is where it was kind of odd. I ran 3 test just so I knew it wasn't a fluke, but my scores were as follows.
Test 1 464/425
Test 2 499/418
Test 3 466/392

Now in all fairness I know I did not have trim enabled in OS X. For better performance make sure it is enabled.

Just about 6 weeks ago I decided to sell my 13" MBP to get a 2012 15" Non-Retina MBP (I wanted the ability to upgrade RAM and HDD without Apple premium). So I will comment on this same drive under Windows 7.

So I removed this Force 3 and decided to put in in my wife's aging Lenovo laptop she uses for work. It is running windows 7 so there is no way to just restore applications unless you clone the drive. And that is just what I did. First I de-fragged the existing Windows drive 3 times with PD12. Once that was done it took about 30 min to clone a Windows drive with about 65GB used in a Dual SATA dock with an eSATA connection. Once it was re-installed in the Lenovo I booted into Windows. It added the driver automatically the I rebooted. What would have taken her 1:30 minimum to reboot took about 50 seconds. After the desktop was up I went and ran a WEI to let Windows recognize it was an SSD. WEI score had the drive at 7.8 where the old drive was at 5.6. Now as I said this is an older laptop. A Socket 1156 Pentium Dual Core with SATA II only.

Once I finished the WEI I wanted to test it so I shut Windows down. From a cold boot to a fully functioning desktop it took 38.9 seconds but my wife has several things that start at boot. Then I did a restart. It took 21.8 seconds.
I used ATTO for testing the speed. But please remember this is connected to a SATA II controller in this laptop.

Test 1 298/262
Test 2 289/260
Test 3 294/269


If I had it to do over I would choose this drive again. It's performance is great. I have used other SSD's that were not as impressive and they cost way more than this drive. The time it has been running there has been not one problem. No stutter (although that was an issue with XP and SSD's), no freezing, no lag. My wife is so happy i removed it before I sold my MBP because it has made her laptop so much faster and more bearable.

If you are new to SSD's they are a worthy investment if you do any drive intensive computing. If all you do is spend your time on the internet using facebook or reading email, there would not be a huge benefit for you except faster boot times. But for those that will use this drive I will say the performance gain under Windows and OSX is exceptional and worth every penny. Even more so now when the price is below $1/GB. When I bought this I paid $80 more than it is now. I say go for it if you need the speed.
Were these reviews helpful? Let us know

Look for similar items by category