Other Sellers on Amazon
+ FREE UK delivery
+ FREE UK delivery
+ £4.19 UK delivery
Akasa AK-CC7117EP01 K32 High Performance Intel Cooler for LGA775, LGA1156 and LGA1155
|Price:||£10.87 & FREE Delivery in the UK on orders over £20. Details|
|You Save:||£1.07 (9%)|
- Choose from over 13,000 locations across the UK
- Prime members get unlimited deliveries at no additional cost
- Find your preferred location and add it to your address book
- Dispatch to this address when you check out
- Enter your model number above to make sure this fits.
- Designed for Intel LGA775, LGA1155, LGA1156
- Supports Intel Pentium 4, Core2Duo, Core2Quad, Core i3, Core i5
- 92mm low noise PWM fan
- Intel reference push pin for reliable retention and easy installation
- High performance thermal interface pre-applied
Frequently Bought Together
Customers Who Bought This Item Also Bought
K32 uses a high engineering omni directional heatsink providing efficient CPU and motherboard zone cooling. Low noise 9.2cm PWM fan in killer Viper yellow uses Intel approved power management (PWM) where speed is regulated automatically by CPU usage. Under normal conditions the CPU fan speed is low ensuring low noise computing.Intel approved pushpins ensure easy installation, reliable retention and maximum compatibility on both LGA775, LGA1155 and LGA1156 platforms without any mounting adjustment, pushpins will automatically slide into correct position.K32 is designed to work with CPU’s up to 95W but greater cooling efficiency can be attained with efficient case airflow. Pre-applied high performance thermal compound ensures clean and easy installation.
K32 uses a high engineering omni directional heatsink providing efficient CPU and motherboard zone cooling. Low noise 9.2cm PWM fan in killer Viper yellow uses Intel approved power management (PWM) where speed is regulated automatically by CPU usage. Under normal conditions the CPU fan speed is low ensuring low noise computing.Intel approved pushpins ensure easy installation, reliable retention and maximum compatibility on both LGA775, LGA1155 and LGA1156 platforms without any mounting adjustment, pushpins will automatically slide into correct position.K32 is designed to work with CPU’s up to 95W but greater cooling efficiency can be attained with efficient case airflow. Pre-applied high performance thermal compound ensures clean and easy installation.See all Product Description
What do customers buy after viewing this item?
Top Customer Reviews
I didn't want to go through the trouble of taking my motherboard out just to fit in a fan. I wanted something that would just clip in and do the job since I'm going to be running at stock speeds with turbo enabled, so I don't really need any serious cooling. That's one of the reasons why I bought it.
When it arrived I was surprised, the build quality is actually really good.
Which I was not expecting.
So I went ahead and opened it up, I removed the pre-applied thermal paste (As a good thermal paste definitely makes a difference) and applied MX-4 to the CPU.
Make sure you turn the pins in the opposite direction of the arrows beforehand or else they won't click in. (As it also says in the manual).
I simply placed it on-top of the CPU, fit it in place and just pushed the pins in. (Remember to ALWAYS make sure you feel a click or you hear one, or else it could mean you haven't fit it properly and then you'll be wondering why you're getting such high temps.)
Installation was super easy.
The problem I encountered was that my temps were a little high, around 45c. But after some research, I found out that the thermal paste needs some time to "cure", like set into place. After a couple days the temps dropped from 45c to 40c and then now they're around 33-38c degrees idle. The manufacturer who makes MX-4 (The thermal paste I used) Say that it can take from 100-200 hours for the thermal paste to cure. So don't start taking your computer apart straight away if you're not getting the best temps.Read more ›
While significantly bigger than the stock fan, the overall footprint is similar and caused no problems with fit or ram clearance. Load temperatures decreased by around 8c and noise is minimal under load and whisper quiet at idle (assuming you set your bios defaults to quiet of course).
Perfect for the price!
Incidentally, I bought an arctic freezer 7 Pro Rev.2 before this one and broke it trying to install it. It was really badly made, with a very flimsy plastic frame and instructions that require you to apply force to the frame to fit it. On top of that, the fan didn't work. Stick with this Akasa. It's much better. And cheaper.
The fan runs my i5 processor as if it were stone cold, so more compliments.
However, it is audible but millions of times better than the fan that was on my old AMD. It has a dB level which is just above the fan noise on my PS3 - MK1. It becomes more audible when the CPU is underload and accelerates the fan RPM but again, it is not so much of a worry.
The thing is, I wouldnt know which fan runs the most quieter, except to say this fan, once installed and the MOBO and system parameters are tuned up, it runs fine. I was disappointed when I first switched on and thought "what a racket"! However, as I say, once the whole system is set up and the CPU and MOBO are working in harmony the thermal properties are most regulated and the fan calms down nicely. In fact, I like a little fan noise when working along, as it feels therapeutic in some mad way. However, there is fan noise and FAN NOISE!!! YOU KNOW WHAT I MEAN??!! ;o)
One way or the other it is perfectly tolerable and unless someone can point me to a fan that is 100% inaudible and not liquid cooled-based, then I have no problem with this fan and especially at the price. I'm happy enough.
Most Recent Customer Reviews
bought this as a replacement for my grandparents pc as their fan was getting loud, and so this is really quietPublished 6 days ago by Amazon Customer
This fan is really good, it has brought my CPU temps down by about 5c compared to the stock fan and it is nice and quiet too :)Published 1 month ago by Clinton Davies
For Some Reason,I couldn't Install it due to Lugs not Locating Correctly,so Used the Fan which was Supplied with New i7-4790k.. Read morePublished 2 months ago by ****
Beware, this CPU cooler is noisy!
Cools CPU fine, but it's extremely noisy and runs at least 10 times louder than the stock intel cooler, that's not even an... Read more
This is a great replacement fan/cooler. Although the instructions are minimal and you will almost certainly want to look online at a tutorial if you're a novice, like me, the... Read morePublished 3 months ago by Hayley Archer
great cooler but the retention pins wouldn't lock into place on my motherboard - they were secure enough just being pushed through the motherboard holes - amazing value though and... Read morePublished 4 months ago by Alan
Easy to fit, no tools required. Compact, quiet and effective cooling. Comes pre-treated with compound. Excellent value for money.Published 4 months ago by Roger Bradley
I bought this a few days ago, i have a low to mid range pc, and my previous fan bust, i bought this one and was delighted at how fast the fan was. Read morePublished 4 months ago by Amazon Customer