10 of 10 people found the following review helpful
Best screen protector (and fitting method) ever!,
Verified Purchase(What is this?)
This review is from: Hori Officially Licensed Precision Screen Filter (Nintendo Wii U) (Accessory)
Ace screen protector. Love the peeling mechanism to prevent fingerprints/dust etc getting on it and to help line it up easily with no bubbles. You peel off a wee square (pull tab no.1) from the back surface that goes onto the screen, then press that down and line it up on the screen. Holding your finger on that you then peel off the whole of the other backing side (pull tab no.2) so it stays lined up good as it goes down with no bubbles :) You then peel off the remaining backing (pull tab no3) from the side with the wee square on it, and voila, the whole thing is lined up good and securely stuck bubble-free! If there are any bubbles at this point you would use the included cardboard swiper to remove them before you carefully peel off the last tab (no. 4) which removes the protective film from the top surface of your screen protector.
One bit of advice I have when fitting is to not line it up too flush to the 1st edge of the screen as it's a tiny bit smaller than the screen area. I put mine on as soon as I unpacked my gamepad and hadn't switched it on yet, so I didn't realise this would leave an uneven sized gap along the opposite edge from the one I lined it up against. So I have virtually no gap along the top and about 1-2mm gap along the bottom edge of mine and didnt want to lift it off only to make a mess of trying to refit it. If you get it centred good at the first step (tab1) you'll have about a 0.5mm gap right around the screen which I think will line up perfectly with the lit pixel area of the gamepad screen (although it does mean some dust and muck will gather in there no doubt). On the plus side the bigger gap I have at the bottom probably means it'll be easier to get a finger nail in to remove it when it eventually needs replaced (I've already ordered another one as spare for just this purpose btw ;)
Finally I can add that the screen looks bright and clear with the protector fitted, and still feels really responsive. You'd hardly even know it was there. If you got a Wii U, get this! :)