26 of 26 people found the following review helpful
= Durability: = Fun: = Educational:
This review is from: Pintoy Doll's High Chair (Toy)
Product overview and extra measurements:~
Minimal assembly required involving 9 cross head screws; securing the tray, seat and base stands to the main frame. Beautifully smooth solid wood components, natural wood areas seem to be just that. Superb quality paint finish to pale pink sections.
Main frame front and back sections are already fixed in place by screws and wood glue. The seat is already attatched to the back frame section. The front and back frame is connected at the top with a large factory fitted pin each side, giving a scissor opening effect for you to open out. Once open, the seat is fixed in place to the front of the frame. The tray is already fixed to it's own supporting frame which is attatched each side of the seat area. A base stand is attatced under the rear two and front two legs.
Once assembled the tray cannot be lifted up, no danger of trapped fingers. There is no harness but fixing 2 D rings would be easy enabeling a simple harness to be attatched if desired. My daughter has not requested a harness. Her array of dolls, bears and dogs come in and out so rapidly, this would only hinder proceedings!
The whole object is incredibly secure. So secure, a three year old stood on the seat trying to get in; the high chair coped admirably! Not recommended! mentioned to highlight strength. To give you an idea of doll size, our 38cm/15" Tiny Tears is small in this but looks great and asures me is very happy! A good spectrum of doll size can be used as per measurements.
Assembled Measurements Approx:
Floor to tallest arched back rest just over 60cm
Floor to tray just under 53cm
Floor to seat 40.5cm
Bar under tray to upper seat surface 10cm.
Widest point pink base stands 36cm
Tray just over 27cm
Seat just under 19.5cm
Inner sides seat area 20cm
Front to rear base stand just over 41cm
Side view from front of tray to back rest outer edge 27.5cm
Seat front to back 17cm
Our high chair was purchased when my little one was nearly two years old. This will undoubtedly continue to be enjoyed for years to come. Played with inside and out and being continually relocated this shows hardly any play wear. Water and sand have also been in the equasion! Perhaps due to the straight forward no fuss design, both boys and girls have enjoyed playing with this.
A future heirloom, as will the matching cot purchased at the same time of equal quality. There is also a matching set of bunk beds available. I have seen all these in blue replacing the pink, sadly after I bought the pink! Being wood this may be painted absolutely any colour; especially good if pink isn't wanted as blue seems hard to find!
Outstanding John Crane/Pintoy design and build quality for endurance. Happy childhood memories...happy dolls, bears and dogs too!