5 of 5 people found the following review helpful
Quality product,struggle to fit,
Verified Purchase(What is this?)
This review is from: LCD201 17" 19" 22" 24" 26" LED/LCD TV Wall Bracket Tilt, Swivel, 360° Rotate VESA 100 75 (Electronics)
Bracket arrived couple of days after ordering good piece of kit,strong,good quality.Chose this bracket because the foot print that fixes to the wall looked quite big giving a better surface area to hold the monitor.Screws fitted onto the monitor no problems.Used the screws and raw plugs supplied to fix the bracket to the wall.There are six holes but you only get 4 raw plugs and screws. Then came the tricky part there are 2 brass discs that fit in the upper and lower part of the bracket the top one was ok but the lower one kept falling out when attaching the monitor bracket to the wall bracket in the end I gave up on the lower disc even after using brit stick glue to try and keep it in place.There is also a metal tube which fits between the bolt holding the 2 brackets together.You have to try and line this up and fit the bolt through the 2 brackets which is not easy given the limited space.Finally got the bolt through and the monitor "flopped" down onto the wall had to tighten up the nut that stops the monitor from moving up and down and then the nut that stops the monitor moving left and right again not easy in a confined space better to tighten them up before fitting the other bracket .Most monitors are fitted above a desk,if you can move the desk that makes it easier and also if you have another pair of hands.If fitting a monitor I would suggest trying to protect the screen or else you going to end up with a million sweaty finger prints.Overall good quality product but a challenge to fit,especially above a desk.Used it to fit a 27" wide-screen monitor.Tried removing the bracket that allows movement from left to right as was not required and just use the bracket that allows back and forward movement this made the monitor about 5cm closer to the wall which is what I wanted.Unfortunately it was so close to the wall I could not get the bolt through the brackets so don't waste you time trying that.Update Tried another way fixed the bracket to the wall and then the monitor to the single bracket bingo now 5cm from the wall also have the option of attaching the other bracket if needed.