8 of 8 people found the following review helpful
Outstanding replacement for 128GB SSD found in Samsung ultrabooks,
Verified Purchase(What is this?)
This review is from: Plextor PX-256M5M 256GB M5M Series mSATA 6GB/s 512MB DDR3 JEDEC MO-300/Ultrabook Internal SSD (Accessory)
This is one of the fastest SSD replacement drive on the market and a slot-in replacement for the Sandisk 128GB SSD found in several ultrabooks, including my Samsung Series 9. Windows 7 boot time from cold start to login prompt is now around 8 seconds. If you read about the drive on the Net you will also find that it is one of the most heavily tested before leaving the factory which should mean it is one of the most reliable.
To copy across the file system I clipped the new SSD into a "Syba mSATA SSD to 2.5 inch SATA Adapter" (also from Amazon) and put it into an external USB SATA drive enclosure which I then connected to the ultrabook. I then created a bootable USB memory stick containing Clonezilla and used that to boot the uptrabook and mirror the entire contents of the internal 128GB drive onto the external Plextor drive.
If you have a Series 9 then opening the case is relatively easy - undo all the visible screws on the base then gently lift away prising very gently close to the back plastic hinge which is held in place by small plastic clips which pop release. Remove the sticky damping pad from the Sandisk drive, unscrew the drive and substitute the Plextor,and finally replace the damping pad. The laptop booted straight up into Windows and simply required a reboot once it had recognised a change of drive.
The only remaining issue was how to create a new drive letter. As Samsung had created four primary partitions (the maximum) the only choice I had was to delete one partition. I chose to delete the recovery partition as I already have a full backup of the original drive configuration and the Sandisk drive itself as a backup. I could then create a new 140GB partition. And that was it. One faster SSD drive with substantially more data capacity.
Sort: Oldest first | Newest first
Showing 1-2 of 2 posts in this discussion
Initial post: 1 Oct 2013 21:21:46 BDT
M Dhani says:
I need help how did you create bootable disk using clonezilla..
In reply to an earlier post on 28 Oct 2013 09:05:33 GMT
Richard Lewis says:
Sorry about the late reply. The instructions for creating a bootable USB memory stick are on the Clonezilla web site. What can be more problematic is getting your laptop to boot from the memory stick - normally you have to set the correct boot order in BIOS and you may also have to press ESC at boot-up to select the device.
‹ Previous 1 Next ›