Customer Reviews

Dahon Biologic iPhone 4 bike mount

5 star:		(5)
4 star:		(3)
3 star:		(2)
2 star:		(1)
1 star:		(0)

 

 

Well, what can I say about this product? Not a great deal actually. I've used it a couple of times and, so far, it is EXCELLENT!
I cannot comment on it's durability and longevity yet, but it's ease of use, practicality etc are very, very good.
With the iPhone 4 insert you get a perfect fit and the touch screen works perfectly through the case.
I have one, itsy bitsy issue (well I've got to balance the review!) which is the fact that, being an iPhone 4 it has the case on, to address the signal issues (thanks apple!), and it's a tad annoying having to remove it each time to put it on the bike. However this really is just a niggly little thing and doesn't detract from how good I think this product is.
If you want a bike mount for your iPhone (3 or 4), the I would DEFINITELY RECOMMEND this product.

I purchased this product about 2 months ago, and I have used it at least 3 times every week since and I have covered more than 1000 miles with it. The construction of the product appeared to be good, but after a little use, I have noticed some problems with it.

The first of which I noticed that although the iphone 4 fits snugly, once I had closed and secured the lid, I did notice that where the gap between the top and bottom is where the silicon inlay/seal should, but was actually further inside than it should have been. Since then if the weather had looked as though there might have been some rain, I would always check the seal, and on occasion, I would be able to see a small amount of the silver edge of the phone and I would adjust the silicon inlay accordingly.

Another problem I found was with the screen, because it has a gloss finish, if reflects a lot of light and shadows which can make it difficult to read the screen at times. I do have a matt finish screem protector on my actual phone to reduce reflections, but because this is placed inside of the mount, the gloss screen cancels this out.

The next problem I encountered was that the mechanism used to attached the phone mount to the handle bar bracket wasn't too secure. On one occasion whilst cycling along a very rough road surface, I heared something bouncing on the road, I looked down and I saw the bike mount, along with my iphone was not where it should have been. I quickly stopped and retrieved it to find that the phone had been suitable protected from the impact. Since this incident I have always ensured that the mount has clipped in correctly, but this week it failed again. Unfortunatly, there was traffic and it had bounced into the centre of the road where a car ran over it. The case mostly survived, but it destroyed my iphone.

The final problem I encountered was after about 5 weeks use, I attempted to clean the transparency due to finger prints etc., and I did'nt notice immediatly, but the little rubber button fell off. I easily found it and stuck it back onto the adhesive that was still there. Some weeks later, the same thing happened again, but I was unable to find the rubber button, so I ended up just using the adhesive spot, which obviosuly became less adhesive after continued use.

When I received this I was even impressed by the packaging. Comes with an extra silicon to fit all models of the iPhone not just the 4, which I thought was a nice touch. It's so sturdy and solid. I was a bit apprehensive of the price at first but trust me it's well worth it. I may do a video review.

Its pretty good, I like how you can twist it round to landscape. It has sent my phone flying once and ive only had it about a month. That said the phone was fine inside the housing, just dont think it would have been the same story had a car gone over it.
would be better if the clip was wider so you could attach to the frame (i dont have much room on my handlebars) and i think its overpriced. I'd say it was worth maybe £25-£30

I use it while going to work with my bike.
I can check the route with my iphone while listening to the radio. This thing is solid and does what was expected to do.
Very happy.

mixed feeling about this product. as an avid roadie i wanted a case that would primarily protect my iphone from torrential scottish downpours, letting me to use some of the great mapping software out there. as far as waterproofing goes the case seems to work well. i've had it out in showers and performed some water test in the kitchen sink and the phone has stayed bone dry. not sure i'd be relaxed riding it outside in heavy rain tho as the locking mechanism isn't very tight and vibration from the road may well allow water inside over time.

the other thing about this case is the transparent membrane which allows the iphone4 to be operated with no issues whatsoever. wearing gloves would be a different matter but that'a asking too much.

now to the main problem with the unit - the clamping mechanism. it simply isn't strong enough to stop the unit rotating on your bars or moving slightly over time, particularly if you're riding high pressure tires over rattling road surfaces. mountain bikes with decent suspension would probably work better, the exact opposite of what some folks are saying below. for the record, roadies take way more vibration than mountain bikes due to the lack of suspension and 120psi tires.

overall i'd say it's worth a punt but maybe only for short commutes or on hybrids or mountain bike with more forgiving rides. if you're a serious rider on group rides over 50 miles you won;t want this device annoying you with its constant slipping. i would also feel anxious about my iphone in a downpour over rough roads as the sealing catch isn't tight enough to instil confidence.

This holder can be secured to virtually any handlebars thanks to its flexible clip. I had this on and was on my way within ten minutes. The holder fastens to the clip securely provided that you push it all the way home (listen for a click). The case hinges open to allow you to get the phone in or out without unclipping the holder. Separate waterproof liners are provided to snugly fit 3/3G or 4/4S phones. The hinged front has three clips to hold it in place, one at the top, one at the bottom and a double-lock main clip at the side. So long as all three click home, this is really secure and in an unexpected downpour proved absolutely water-tight. The ability to use the phone's screen, home button and on/off switch whilst in the case is great.

I've been cycling with it for a few weeks now on mixed road and off-road and it's not moved about at all. However, it is important to check that all the clips have clicked home. The only small problem so far has been the highly reflective screen cover it uses. Should you be lucky enough to be cycling in the sun the screen becomes pretty hard to see. Otherwise this feels well made and rugged and I would definitely recommend it.

Excellent product excellent delivery time, the iPhone 4 fits perfectly into the holder, tested the product doesn't seem to have any problems handling everyday use, ideal for any cyclist who has an iPhone

A great product. Keeps iPhone in place and visible. I've been out in the rain and iPhone remains absolutely dry. The product comes with a removable inner protective foam moulded for iPhone 4 or 3G/S. When in the case you can use iPhone screen and camera, home and lock buttons. You can't realistically make a call with it, unless you use a headset of some description. ALso the case covers the light sensor so take off auto brightness in the settings before you put it in the case.

If you are a cyclist it's well worth the money.

Overall OK and nice design. Two minor problems:
The little rubber button fell off and disappeared before I even got it mounted on my bike - but it works OK without it.
It is almost impossible to not over-tighten the plastic mounting bracket.