37 of 37 people found the following review helpful
5.0 out of 5 stars
Platform Specification, 11 Jan. 2011
I chose this monopod, because for considerably less cost than the Manfrotto 695CX, it offered more height for marginal increases in weight (plus 0.06Kg), and closed length (plus 3.5cm).
However, the manufacturer's website, and the instructions that came with the item, stated that the outer 3 / 8" thread was spring-loaded, and would retract into the platform to reveal the 1 / 4" thread (as Manfrotto 695CX). This was not the case on the item I received.
Eventually, it was discovered that there is a small Allen-screw (in the side of the monopod just below the platform) which is only revealed when the wrist-strap swivel is rotated. Loosening this screw half a turn (with the supplied Allen-key) allows the whole platform to be unscrewed. The central threaded stud can then be reversed to reveal the alternative thread.
It may be that I have received the last of an earlier design, or the first of a simplified design.
Update March 2011
This issue has subsequently been discussed with Giottos (Focus-on-Imaging NEC March 2011), and the reversible threaded-stud model that I received is the latest design.
I have been using the 3290B monopod with the Giottos MH7002-652 quick-release ball-head. A reassuringly solid combination, where the camera can be held in one-hand as the monopod is attached (by the self-locking action of the head clasping a camera-mounted plate).
At 6ft (1.83m) tall, I have only needed to use four of the five sections for eye-level work; this means that the stiffest (larger diameter) sections can be used. It also means that the extra section could be utilised if the monopod was used on an incline with the camera `downhill'. Any minor movement to `frame the shot' has been achieved by adjusting only the top-section using the flip-lock clasp.
Overall a well-designed, and well-constructed product - recommended.