Length:: 0:37 Mins
Arrived in good time.
Removed my old bell, plugged this one in and was up and running in 5 mins.
The only problem I had was setting the bell to different tone and this was solved by the supplier by sending me a video.
Here are the instructions with my amendments:
(a)Set Receiver into learning mode by pressing Volume Control Button on the receiver for 5 seconds until it starts flashing and makes a sound to indicate ready status.
(b)Next, configure your Receiver by choosing a melody by pressing Music Control Button.
(c)Next, pair your button/ sensors by triggering the Receiver with 1 or more remote control button or sensors, trigger again to confirm the setting. The pairing MUST be done when the actual tune is playing and not after the tune has completed playing.
(d)Finally, exit from learning mode -- press Volume Control Button for 5 seconds until the LED stops flashing. In this case press the Volume Control Button to save and exit while the bell tone is playing after the transmitter is pressed the second time in step c above.
The volume control is great.
As for the 1 year warranty, the supplier covers this.
Here's a video showing how to set the bell tones.