hi, I now have the extreme6, but anyway I think their are 3 I am using a soundblaster z and of course a graphics card, (MSI TF GTX 760) and there are still spare slots. hope some help. mike.
By M. Wardman on 10 June 2014
Yes. Typically mid tower cases can suport up to ATX size motherboards, the only type of motherboard that wont fit in there is an extended atx but thats nothing for you to worry about;)
By Stavros Vorkas on 18 July 2014
Yes it does work with i7 3770k Clock speed - 3.5GHz (3.9GHz Turbo) Cores - 4…
Yes it does work with i7 3770k Clock speed - 3.5GHz (3.9GHz Turbo) Cores - 4 Threads - 8 Cache - 8MB Process - 22nm Socket - Intel LGA 1155 And the CPU Support List is in the following link: http://www.asrock.com/support/CPU.asp
By Anonymous on 31 December 2014
Asrock needs 7 standoffs and 7 screws. . And there are 7 holes in the motherboard which must be aligned with the 7 standoffs. You need to look carefully at the motherboard- while it is outside the nzxt 410- to localise the position of the 7 holes. All other motherboards of similar size have 6 holes to be aligned with 6…
Asrock needs 7 standoffs and 7 screws. . And there are 7 holes in the motherboard which must be aligned with the 7 standoffs. You need to look carefully at the motherboard- while it is outside the nzxt 410- to localise the position of the 7 holes. All other motherboards of similar size have 6 holes to be aligned with 6 standoffs. However, Asrock has an extra hole for an extra standoff. nzxt 410 has 10 standoffs for full ATX motherboard. They are arranged in 3 vertical rows as follows: 1- The first vertical row-close to the front of the case and the hdd- has 3 standoffs. It is not needed for your Asrock z77 extreem4. 2- The second row of standoffs has 3 standoffs. Starting from down below: you find the 1st standoff next to Chassis Fan Connector (CHA_FAN1). The remaining 2 standoffs: one is exactly below the first memory slot and one above it.. The first memory slot is opposite the CPU socket. 3- The 3rd vertical row has 4 standoffs. The first is close to the PSU location and it is followed by the second standoff which is specifically needed for all Asrock motherboards. The 3rd standoff is located just below the I/O opening. The 4th standoff is at the top -just above the I/O opening. If your nzxt 410 has housed a previous motherboard it is more likely than not that 2nd standoff in the 3rd row- which is specific for Asrock board- is missing. In such a case you can take a standoff from the first vertical row which is NOT needed or buy one from any pc shop. As for the difficulty in the alignment: either you as a friend to help you because you need to push the motherboard against back plate. And the resistance you face is normal. Do not bend any metal in the plate. The plate helps to prevent static electricity. However, If you find it very difficult to align the motherboard with back plate shield, remove the plate and install the motherboard without a plat. Up to my experience, no problem in that and alignment would be very easy.
By Anonymous on 12 December 2014