The 4” (100mm) DX100 range of extraction fans are stylish, compact and easy to install and are supplied with a wall/ window kit including telescopic ducting and an external grille. The DX100 fan is suitable for installation into walls, ceiling and window applications.
Designed specifically for use in bathrooms, shower rooms and toilets the DX100 is BEAB Approved, IPX5 rated and conforms to Building Regulation Part F1. The fan has extract performance of 76meters³ of air per hour and a sound pressure level of just 35 dBA @ 3 meters.
The DX100 is supplied with everything you need to complete the installation:
Telescopic Wall Tube: The round plastic telescopic wall tube can be adjusted up to 300mm eliminating the need to cut down to size. The wall tube is 100mm in diameter.
External Grille: A black grille is 155mm x 155mm square with a projection of just 15mm.
Window Fittings: A window spacer and gaskets are provided for installation into single glazed windows up to a maximum thickness of 6mm.
Wall Fixings and Raw Plugs: supplied to aid installation into walls.
If installing into a wall or ceiling the recommended hole diameter is 117mm. If installing into a single glazed window the hole diameter required is 125mm.
The DX100 range are available in four variants:
Please check with our fan selector to ensure the correct fan is purchased to meet your requirements. If replacing an existing fan wiring will already be in place, for an easy installation it is important you select the right product.
Standard: Typically connected to the light switch the fan is turned on/off by operating the light.
Pull Cord: A manual fan that is turned on/off by pulling a cord.
Timer Delay: Typically connected to the light switch, the fan is turned on and off by operating the light switch with a timer overrun enabling the fan to continue to run for between 2 and 20 minutes after the light has been turned off.
Humidistat with Timer Delay: The fan is turned on/off with the light switch and also by sensing a rise in humidity within the room. The overrun timer can be set to operate the fan once it has been turned off, adjustable between 2 and 20 minutes.
If you are replacing an existing fan it is important that you identify which type of fan you are replacing.
I have a STANDARD fan… you can select a new standard fan or you have the wiring in place for a pull cord fan.
I have a PULL CORD fan… you can select a new pull cord fan or you have the wiring in place for a standard fan.
I have a TIMER DELAY fan… you can select a new timer delay fan or you have the wiring in place for a humidistat fan.
I have a HUMIDISTAT fan… you can select a new humidistat fan or you have the wiring in place for a timer delay fan.
Other options are possible but will require additional wiring, it is recommended that you seek advice from a qualified electrician.
Electrical Power Rating: 12 watts
Guarantee: 2 years
Fan Dimensions: 155m x 165mm x 43mm
Mains operation: 220-240v 50Hz
Class B insulation for operation in ambient temperatures of up to 40 degrees.
Lubricated for life motors with thermal cut out protection
Clip off front cover for ease of cleaning