nice quality drive, useful for adding the finishing touch to that old, but cherished laptop/tablet (HP TC1100 in this case) that you are clinging onto
admittedly expensive for the storage capacity being bought compared to desktop or even laptop magnetic hard drives, but anyone looking at a drive like this, probably, like me, were just after housing a non-bloated operating system only with the added benfits an SSD brings in an older system with IDE interface only
read and write operations are limited by its own interface (IDE) compared with all the newer sata models, but you will see a small improvement in responsiveness and speed in the majority of tasks, certainly my win7 boot was quicker and has definitely made a noticeable improvement to heat and battery longevity despite naysayers claiming that SSD doesnt actually have battery benefits, well it does here and its not placebo.
this SLC version i am sure will beat the overall performance of the cheaper MLC models, so bare that in mind when you see a larger capacity for the same price or cheaper, remember that MLC can be a disapointment in practise, especially in IDE/PATA where a drive like this has minimal gains anyway - so max out and go SLC for a more reliable and satisfying purchase if you are limited by needing IDE in the first place
two physical things to make mention of, this drive was a fair bit thinner in its height | than the magnetic drive it replaced, so in order to avoid strain on the pins when fitted, i secured a piece of cardboard to its belly cut to size to make it the right height so as to match the previous drive.
also, be careful to avoid inserting the drive upside down, sounds obvious i know, but when the jumper is removed from the two pin set to one side of the SSD drive, it all blends into one in terms of looking down at the jumper/data pins and it will fry your IDE controller and the drive itself, made more confusing by the fact that in my tablet the drive i replaced was upside down in its orientation anyway, so if i had replaced like for like i would have had problems.