Evo15 Solar Pir Utility Light
The Evo15 Solar PIR Utility Light is a real game-changer for the budget end of the solar security light and solar shed light market. Look no further if you’re looking for a compact solar sensor light for under £20 that is easy to install and exceeds expectation.
How does it work?
During the day the Evo15's solar panel charges its internal battery giving it the power it needs to light after dark. After dark the Evo15 will activate as soon as it detects motion and turns off 25 seconds after motion stops. At dawn the Evo15 stops activating and starts charging again ready for the night ahead.
The Evo15 is an official Solar Centre branded product
Using the Evo15 as a solar security light
Simply position your Evo15 outside and locate the solar panel in an unobstructed location. The Evo15 will light up after dark as soon as it detects motion and turn off 25 seconds after motion stops.
Using the Evo15 as a solar shed light
Install your Evo15 inside your shed and position the solar panel outside in an unobstructed location (usually on top of your shed). When you enter your shed the Evo15 will light up automatically and turn off automatically 25 seconds after you leave.
How waterproof is the Evo15 Solar PIR Utility Light?
The Evo15 is rated IP44 and is designed for outdoor use in locations that offer some cover and aren’t overly exposed. Unlike cheaper imitations of this light, the Evo15 incorporates key upgrades which enhance waterproofing. These include a rubber collar, a rubber shield behind the back plate and a redesigned solar panel jack which creates a waterproof connection when plugged into the light.
How do I install it?
The Evo15 Solar PIR Utility Light is very easy to install in comparison with mains powered security lights. The box contains the light unit a solar panel connected to 4.8m of cable. Before beginning your installation is worth making sure that there is a suitable solar panel location within 4.8m of where you intend to situate your light.
- Position the solar panel and mark the holes
- Drill holes, and screw panel into place
- Position light within 4.8m of panel and mark holes
- Drill holes and screw mounting band into place
- Clip light into mounting band
- Connect solar panel cable to light and turn on
|Dimensions ||Height ||Width ||Depth |
| Light || 130mm || 90mm || 130mm|
| Solar Panel || 190mm || 130mm || 70mm|