Scart or 3 RCA Phono to RF Aerial Modulator
Supplied with a male to female aerial cable and a power supply.
Converts any scart or 3 RCA output into an aerial output! Perfect solution for older TVs with no scart input or for distributing an aerial signal from a scart device (such as a CCTV DVR) around a property.
How to use - The aerial cable from your wall should be plugged into the modulator. The aerial cable supplied should be then run from the modulator to the TV. The scart or 3 RCA device should be plugged into the modulator.
Distribution - The modulator can also be used for distribution across an aerial network. For example, if the RF output of this scart modulator was implemented before the signal was split (in a loft), all TVs on the network would have access to the scart device via the aerial sockets.
Pass Through - This means all RF frequencies already running along your aerial cable (from your aerial) will be able to pass through the modulator without being stopped, meaning you won't constantly have to unplug the modulator after use.
1 x Scart or 3 RCA Input (only one can be used at once)
1 x Scart Output - for connecting to a recording device (VCR)
RF input and output with pass through.
Output channel 21-69 (LED Display on the front of the modulator)
PAL-B/G/I (works with all UK TVs)
Power Supply - 12V DC 250mA
Dimensions - 122 x 31 x 83mm
Retail packaged with instructions
The PCB (printed circuit board) has been designed to add a high quality additional frequency for an ultimate quality picture through your aerial.