Features: Widely used with electric equipment for power supply: Vehicle, GPS, Mobile phone, camera, mp3 (cannot smoke) Wiring kit for cigarette lighters to install in any 12V motorbike, Boat, Riding mower, tractor or car. Barrel inner diameter: 2.2cm/0.87" Barrel inner length: 3.0cm/1.18" Cord Length: 67cm/26.4" Voltage:12V
Package Included: 1 X Lighter Socket Plug 2 X Connector wire
What Other Items Do Customers Buy After Viewing This Item?
I needed a second 12v feed for mobile phone charging and this was a very low-cost fix. Only 3 stars as it does not attach with a fixing, but relies on a raised ramp on the body to locate it. This is OK providing you are installing it into a flat surface no thicker than 1.5mm, but try finding that on a modern facia.
This product turned up with far too short leads and with the ring on the positive lead loose on the bottom of the bag so I now need to go out and purchase a new set of leads and connections an extra cost I didn't envisage in order to use this switch!
Be careful if you use the supplied inline fuse holder. I wired this up on a boat, used my own 10 amp fuse and wired it to a bus bar correctly. Tested it with 120w 12v kettle and the fuse holder melted inside of 10 seconds. Luckily it melted right at the end of the holder and caused the connection to break very quickly thus taking the power out of the equation. The fuse didn't blow.