The small sized 56K USB Fax Modem is to connect phone to PC via USB port to make/receive voice calls, and send/receive fax. It's with Conexant Chipset.
With 2 phone line ports you can connect the modem with 2 phones, by which you enjoy the convenience to change phone lines. Of course only one fax (number) can be used at the same time.
Brand new! Conexant chipset!
Ports: 2x RJ11 (common telephone/dial-up modem interface) USB (type-A Male)
Data mode capabilities: V.92, V.90 56 Kbps
Fax Mode capabilities: ITU TV. 17, V. 29, v.27ter, and V.21 Ch2 Group3 FAX
Error Correction capabilities: V.42, MNP4-2
Data Compression: V.44, V.42bis, MNP 5
Operating Temperature: 0°C- 40°C
No external power supply required
System Support: Windows 98 / 2000 / XP / XP64 /Vista 32 & 64 /Windows7 32& 64/Linux
Make Voice Calls from your PC
Send/Receive Fax with your PC
Connect to the internet at 56k dial-up modem speeds
1. I can't receive fax?
BitWare, WinFax, and the Fax software that's from Windows are supported by the modem. Eastfax may be unable to be supported by the Conexant modem esp. for receiving fax.
Besides, all modems don't support receiving or sending faxes while PC is turned off.
2. My windows7 can't find the modem?
The modem supports windows7 32bit and 64bit perfectly. Most windows7 OS can recognize the modem and install its driver automatically. However some compressing edition of
windows7 can't do it. Then you need to install the driver from its CD drive.
3. How do I check whether the modem driver is correctly installed and working properly?
1). Go to Modem inside the Control Panel and check if there is any modem listed. Then click on the Diagnostics tab, highlight the com port where the modem is set and click on More Info. You should see a set of commands and responses listed. 2). Try to connect to an ISP.