The Pinocchio RGB Master Kit
has all the neccesary components to achieve colour change LED lighting. The kit is plug and play, allowing simple installation.
The Pinocchio RGB is a high power Edison LED downlight that provides a decorative starry light ideal for location in bars, clubs, shops, as a feature in the home or achieve different mood settings. Ideal as a replacement for standard halogen lamp downlights which generally consume more power and produce more heat. The lumen output is 100 lumens.
The fitting is constructed from aluminium and acrylic and incorporates one 3W Edison LED. The face has a polished chrome finish. A metal heatsink is located on the back of the downlight to disperse any heat produced by the LED.
A total of 6 of these fittings can be controlled from one Wise Chameleon receiver, if more than 6 Nebula fittings are required, simply add a slave chameleon pack (WISE RGB SLAVE) to allow for an extra 6 fittings. An unlimited number of Chameleon Slave 350mA 21W packs can be used with a Chameleon Master 350mA 21W pack.
Two 1m leads are connected to the back of the fitting, one to wire straight to an RGB interface such as our Wise Chameleon Master Dimming pack, with the other connecting to the next LED fitting or to an end cap if it is the last fitting on a run. If used with a Wise Chameleon Master Dimming, the fitting can create a spectrum of over 1000 colours. This is created by mixing the different coloured LEDs together at different times to make other colours. (i.e: Red and Blue mixed together will give purple, Blue and Green will give Cyan, and Green and Red will give Yellow). When all these colours have been mixed together, a bright white light is created.
The minimum needed to create the colour changing effect is one LED Driver for each WISE Chameleon Master Dimming used, one of these fittings, power cord to con