COMMONLY USED SURFACE-TO-SURFACE APPLICATIONS ARE: •Glass / Rhinestone •Clay Pottery / Rocks / Sea Shells •Beads / Fabric •Ceramic / Wood •Glass / Metal DIRECTIONS & TIPS FOR USING E-6000®: Note: E-6000® hardens by solvent evaporation and forms an immediate bond that is difficult to reposition after both adhesive coated surfaces are placed in contact with each other and sufficient pressure is exerted to establish full contact. SPECIAL TIPS: To extend life of product, be sure cap is secured back to original position. Use a toothpick as a disposable applicator for very small applications such as beading. Remove, recap and allow plastic nozzle to dry. Remove dried product from nozzle by pulling out through threaded end and reuse nozzle. *CAUTION* Intentional misuse by deliberately concentrating and inhaling the contents may be harmful. **WARNING** This product Contains a chemical known to the state of California to cause cancer. Harmful if inhaled or swallowed. May cause dizziness, headache or nausea. Can cause Skin and eye irritation. Exposure may cause damage to the kidneys or liver. Cancer agent based on experimental data. Keep away from heat and flame. Contact with flame or hot surface may produce toxic gasses. Tips whilst using the E6000 glue. * Where appropriate gloves when working. Best not to get the glue on your skin. If you do wipe clean. *Wear a mask if working with the glue for a long time. *Make sure your room is ventilated *If a mask is not suitable we recommend opening the windows in the room. *Wipe clean the surface area you are working on after use. If you have any more concerns regarding the glue please feel free to email us or search on Google for tips on how others are using the glue. Their is a lot of information on the internet.