Further kinds available at www.stika.co
How to apply our vinyl stickers:
Firstly ensure the intended surface/position is clean and free of dust. Ideally used an alcohol-based cleaner or soapy water solution.
Position the sign in place using a length of masking tape along the top of edge.
Hinge the sign up and peel away the backing paper, this will reveal the self adhesive side.
Apply gentle pressure to masking tape and sticker.
Using a credit card or the back of your hand, squeeze the sticker down working from top down.
Once fully stuck down remove the masking tape.
If you need to remove a sticker and are having difficulty, try gently warming it up with a hair drier, this softens the vinyl.
Vienna/Geneva Convention (Not DVLA EC) states:
IDENTIFICATION MARKS OF MOTOR VEHICLES AND TRAILERS IN INTERNATIONAL TRAFFIC (Annex 4)
1. The identification marks shall comprise:
(a) In the case of a motor vehicle:
(i) The name or the trade mark of the maker of the vehicle;
(ii) On the chassis or, in the absence of a chassis, on the body, the maker's production or serial number;
(iii) On the engine, the engine number if such a number is placed on it by the maker; 47 -
(b) In the case of a trailer, the information referred to in subparagraphs (i) and (ii) above;
(c) In the case of a moped, the cylinder capacity and the mark "CM".
2. The marks mentioned in paragraph 1 of this Annex shall be placed in accessible positions and shall be easily legible; in addition, they shall be such that they cannot be easily altered or removed. The letters and figures included in the marks shall be either in Latin characters or in English cursive script and in Arabic numerals only, or be repeated in that form.
For further info on the European legislation please visit: