This tool is quite sturdy but has one big drawback.
For clips which are fitted tight to the surface, the RT004 cannot easily be slid under the heads. The fork ends are only tapered down to about 1/16" thick so tend to buttt up against the clip edges rather than slide under like a knife. There's no chamfer at all to the inside edges of the vee slot either.
If nothing else, luckily the fork tounges are not hard enough to need grinding so better tapered edges can easily be filed as needed.....which is what I had to do to suit my needs.
Had the zoom on the picture been better, I would have seen this and not bought the item.