I've been looking to wall mount my TV for a while now, since it sat too low on the TV stand. There are simply loads and loads of different TV brackets available. I did not want one which was slim line (against the wall) as I am aware that the cables connected to the back of the TV require a certain amount of room. Also I wanted to avoid the situation where the TV wall bracket would be visible from behind the TV and so after having seen the reviews of this wall mount I decided to invest. I have a 37in LED tv which weighs 15Kg, which this bracket can comfortably support.
Firstly the delivery process was top notch, the order turned up a few days after being placed.
All the tools, bolts and rawl plugs are included and the instructions are fairly straight forward. There are an array of machine screws (3 sets of different sizes) provided to ensure that the back plate can be attached to the rear of the television.
You'll need to do some simple calculations to determine where to drill the three holes needed to hold the wall bracket (which holds the cantilever arm), this is to ensure that you don't end up with the television too high and also too far to the left. I calculated the top hole for the wall bracket to be 6 cm below from the top edge of the TV and 22 cms to the right of the centre of the back plate.
You'll need a drill with a size 10 drill bit and a spirit level to ensure you get all the holes right.
Once the cantilever arm is in place I'd recommend asking a friend to help lift the TV to attach to position the back plate onto the fastening clamp and then holding it, while it is being screwed in.
This bracket is very strong and sturdy and I can happily recommend it, it is totally hidden from sight of my tv. However before purchasing check the weight of the TV to ensure the clamp is suitable to support the weight.