Humbrol Acrylic 50ml paints are non-toxic and water based so can be thinned with water, removing the need for chemical thinners. Usage: A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other substrates. Substrate: A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability). Coverage: 50ml tin covers approximate 1.0 meter square. depending on thickness of application. Application: Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry. How to clean: Brushes: use Humbrol enamel thinners; Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry. Safety notice: Flammable. Repeated exposure may cause skin dryness or cracking. Vapour may cause drowsiness and dizziness. Contains cobalt octoate,methyl ethyl ketoxime. May produce an allergic reaction. Keep out of reach of children. Keep away from sources of ignition. No smoking. Use under adult supervision. If swallowed, wash mouth out with water. Do not induce vomiting., keep at rest and obtain medical attention. Available in Gloss finish. Drying time: 1-2 hours.
Humbrol - AQ0246 - No 22 White - Gloss (50 ml) - Enamel 50ml (No.2)