Always on for faster, safer voltage testing
2AC is the latest addition to the VoltAlertTM ac non- contact voltage tester family from Fluke and is designed to be pocket-sized and easy to use. The 2AC tests for energized circuits and defective grounds, whether it's for an electrician on the factory floor or the do-it-yourselfer around the house. The tip of the pocket-sized tester will glow red when within close proximity of an outlet, terminal strip, or power cord where voltage is present.
•Voltage detection from 200 to 1000 V ac, suitable for a wide range of residential, commercial and industrial needs.
•NEW! Always on, using special low power circuitry to sustain battery life and ensure your 2AC is always ready.
•NEW! Innovative 'Battery Check' button function ensures battery is in good condition*
•Category IV - 1000 V overvoltage rated product for best in class user protection
•Integrated clip design, optimized for pocket storage
•Powered by 2x AAA batteries (included)
•Fluke ruggedness and reliability
*Use of Battery Check function is optional and for convenience only, it is not intended as a substitute for checking the unit on a known live source before and after use
Senses the steady state electrostatic field produced by ac voltage through insulation without requiring contact to the bare conductor. A red glow at the tip indicates the presence of voltage.
Meets IEC 61010-1:2001, UL 61010-1 (2nd ed.), CAN/CSA-C22.2 No. 61010-1-04, and ISA-82.02.01 Pollution Degree 2
Meets IEC 61326-1:2006
200 V ac to 1000 V ac, CAT IV 1000 V rated
Operating: -10 °C to 50 °C (-14 °F to 122 °F)
Storage: -10 °C to 50 °C (-14 °F to 122 °F)
0 % to 95 % (0 °C to 30 °C)
0 % to 75 % (30 °C to 40 °C)
0 % to 45 % (40 to 55 °C)
2000 m (CAT IV 1000 V)
Clean with damp cloth