Product Description
FIRST ALARM
KEYPAD Alarm System
Easy to install, No Wiring
Mount the alarm unit to a wall or door using screw provided and key hole opening on the back of the alarm. Remove the double-sided adhesive tape from the back of the Magnet until that is attatched to the alarm unit by wire. Mount it to the left or right hand side of the alarm unit, depending on the way the door opens. Remove the double-sided adhesive from the back of the second magnet and attatch making sure the arrows are pointing towards the Unit. There are 3 settings you can choose...
Chime
When a intruder attemps to enter your home, shed or garage a chime will announce the presence. The Chime setting can be used to warn you that a child has opened a door.
Instant
This mode is used to protect you when you are at home. When the switch is in the instant position, If the door is opened the alarm will sound a 110 db alarm siren. The alerm will sto[p once you enter the security code you have set yourself.
Delay
This mode is used when you are leaving your home. When the switch is in the Delay position, If a door is opened, you have 10 seconds to disarm the unit. If the unit is not disarmed the alarm will sound a 110 db alarm siren. The alarm will stop once you enter your security number.
The First Alarm Keypad system comes complete with Keypad, Hardware, Double-sided adhesive tape and instructions.