Securely hold two mitred pieces of moulding
Magnetic tip which securely holds the wedge in place
The latest addition to our range of picture framing tools allowing the hobby framer or artist to be able to join professional looking frames at home.
The frame clamp has a quick action mechanism to quickly and securely hold two mitred pieces of moulding. Once clamped, the corner is turned upside down and positioned on the non-slip base against the fence for accurate location of the wedge. The fence itself can be positioned to allow for any sized picture frame moulding, up to 75mm wide, with a front and back locating stop which can be set when using wider mouldings which require two wedges.
When working with taller mouldings, up to 100mm, it is possible to perform stacking, where two wedges are inserted on top of each other. The second wedge pushes the first one in deeper so that 2 x 10mm height wedges is the equivalent of a 20mm wedge.
The driver has a square magnetic tip which securely holds the next wedge. The hand lever is pushed down, which requires little force and can be operated by anybody, Until the wedge is inserted and flush with the back of the frame.
Once all 4 corners have been joined the frame is ready for the artwork to be put in, the backing board secured in place, using our T225 Tab Driver, and then hung. We include a FREE hardware kit to provide the finishing touch.
FREE 266 Piece Hardware Kit; 100 x 7mm Wedges 100 x 10mm Wedges 5m Picture Hanging Wire 8 x Screw Eyes 8 x D Rings 8 x Screw Rings 6 x Large Wall Hook 4 x Small wall hook 10 x Wood screw 20 x Masonry Nail 1 x Frame leveler (Spirit Level)
Please Note: Because our items are bulky and heavy, the standard UK delivery charge covers UK mainland only. If you would like delivery to Scottish Highlands, Scottish Isles, Isle of Man, Isle of Wight, Channel Islands or Northern Ireland, please contact us before ordering on 01530 516926