The Bosch PMF 250 CES
The PMF 250 CES is a highly versatile Power Tool suitable for most jobs around the home. It is ideal for applications such as replacing old carpet with laminate flooring, removing bathroom grouting, shortening a door frame or enabling access to a plug socket behind a living room cabinet. Make cuts with precision, even in the most remote corners of your home. The multifunction tool was designed to help you to work accurately, even in tight spaces.
The PMF 250 CES has a clear advantage over conventional power tools, especially in areas close to floors or walls. The power and precision allows for floor panels to be cut precisely or for insulation material to be flush cut in the attic. The PMF 250 CES is the only PMF fitted with an SDS system which allows for quick and easy accessory changes without the need for additional tools, it is also the only PMF that has Bosch Constant Electronic. This means that no matter what load on the unit the speed of the tool remains constant at all times.
Cutting in Soft Wood and Plastic (AIZ 32 EC)
You can make a variety of useful cuts with the plunge cut saw blades for soft wood and plastic. With this handy saw blade you can make cut-outs, for example, in door frames or in furniture to access wall outlets.
Cutting in tight spaces (ACZ 85 EB)
Short or long cuts, in the middle or at the very edge, the PMF 250 CES and the BIM Segment Saw Blade with depressed centre cuts areas that conventional machines only reach with extreme difficulty if at all. Parquet floors are cut flush in no time, protruding wood and new drainpipes will be cut to the right length quickly.
Scraping Residue or Adhesives (ATZ 52 SC)
The scraper blade can help you remove glue from surfaces, stubborn stickers, mortar and concrete remnants or even paint from glass.
Plunge cutting (AIZ 65 BB)
This accessory is the master of versatility. It is ideal for plunge-cutting soft/hard wood such as plaster board and sandwich materials whilst also good for non-hardened nails and screws as well as non-ferrous metals. The saw blade is perfect for cutting door frames to length, cutting wood with nails and cutting laminated panels.
Grout and Mortar Removal (AVZ 70 RT)
Ideal for routing joints on tiles as well as removing mortar or tile adhesive and joints in small corners. It is also suitable for epoxy/glass fibre reinforced plastic.
Sanding Plate and sheets (AVI 93)
Sand smooth surfaces on furniture, curves or even when working on bodywork. The high level of power, low vibration and the PMF’s light weight, you’ll find you can achieve impressive results without the need to apply a lot of pressure.
The depth stop ensures precise cutting depths. It can be easily attached at the clipping neck on top of the segment saw blade series ACZ 85 and ACZ 100. As shown in the picture, depending on the adjustment of the depth stop, precise cuts in 4 steps between 8 mm and 14 mm with ACZ 85 blades and between 14 mm and 20 mm with ACZ 100 blades can be executed comfortably.
Oscillation: the Secret to the All Rounder’s Success
The technical secret behind the versatility of the PMF range is its oscillation principle: accessories do not have a circular motion, but rather oscillate at an angle of ±1.4 degrees - enabling most precise cutting, sanding and sawing.
| || |
PMF 190E Set
PMF 250 CES
PMF 250 CES Set
|Corded or Cordless ||Cordless ||Corded ||Corded ||Corded ||Corded |
|Power Input ||10.8v ||190 W ||190 W ||250 W ||250 W |
|No-Load speed ||5,000 - 20,000 rpm ||15,000 - 21,000 rpm ||15,000 - 21,000 rpm ||15,000 - 21,000 rpm ||15,000 - 21,000 rpm |
|Oscillation angle |
|2.8 ||2.8 ||2.8 ||2.8 ||2.8 |
|Lithium-ion ||YES ||NO ||NO ||NO ||NO |
|Bosch Eco Electronics ||YES ||NO ||NO ||NO ||NO |
|Bosch Electronic ||YES ||YES ||YES ||YES ||YES |
|Bosch Constant Electronic ||NO ||NO ||NO ||YES ||YES |
|Weight (Kg) ||0.9 (including battery) ||1.1 ||1.1 ||1.2 ||1.2 |
For the full comparison table click here.