- Boxed-product Weight: 581 g
- Item model number: 10158
- ASIN: B00J12HBX2
- Date first available at Amazon.co.uk: 15 Mar. 2014
- Average Customer Review: Be the first to review this item
- Amazon Bestsellers Rank: 2,287 in Business, Industry & Science (See Top 100 in Business, Industry & Science)
3D Prima 10158 Taulman Print Filament, Bridge Nylon, 1.75 mm
|Price:||£17.72 (£17.72 / Filament) & FREE Delivery in the UK on orders over £20. Details|
Order now and we'll deliver when available. We'll e-mail you with an estimated delivery date as soon as we have more information. Your account will only be charged when we dispatch the item.
- Choose from over 13,000 locations across the UK
- Prime members get unlimited deliveries at no additional cost
- Find your preferred location and add it to your address book
- Dispatch to this address when you check out
- 450 grams / 1lb of 1.75mm Taulman Bridge Nylon printer filament
- This filament is called Bridge because it brings the strength of Nylon 645 together with the price of ABS and PLA
- Print Temperature 242ºC
Specifications for this item
|Brand Name||3D Prima|
|Number of Items||1|
Base Reference: Starting with our strongest base polymer used for a percentage of nylon 64... See more product details
Customers Who Bought This Item Also Bought
Base Reference: Starting with our strongest base polymer used for a percentage of nylon 645, we began working all of these requests. Adherence to the Printing platform: First, was the adherence to the Printing platform. Those that follow the use of nylon in posts, blogs and 3DP discussion rooms know of using garolite (LE) as a print surface. While this works well for all of taulman3D nylons, garolite is not always easy to acquire and even so, requires a properly cut section that fits each user's unit. Our thanks goes out to our chemical company for helping to change this requirement. The surface properties of most nylons is extremely slippery making adherence to the printing platform difficult. Our chemical company was able to make minor adjustments, to reduce the surface effect just slightly, thus allowing for the use of most PVA glues, either full strength or diluted. Initial testing shows that in some cases, the PVA was better with Bridge than garolite is with 618. Thus, some dilution was used. The specific PVA used in our labs is a very low cost &; White PVA. Reduced water up-take: Next was Reduced water up-take from local humidity. While it is not possible to eliminate the water uptake by nylon, it is possible to localize it to the surface through final processing changes. Therefore when printing, rather than water creating a subtle popping that can effect the surface finish, Bridge will hold the water to the outer portion resulting in a slight steam when wet. The result of this is that Bridge needs little or no drying in the winter and just needs to be warmed in the summer months. This is a manufacturing process that our extrusion house developed and added to our existing taulman3D processes.
Customers Who Viewed This Item Also Viewed
What Other Items Do Customers Buy After Viewing This Item?